Problem with Assura

  • Thread starter Mohammadreza Pourakbar
  • Start date
M

Mohammadreza Pourakbar

Guest
Dear All,

We installed Assura software based on installation guide and we
followed those steps. Unfortunately, when we run Layout XL, we could
not see the Assura menu and there are some warnings as following:

Load shared object file /apps/edatools/cadence/assura/tools.sun4v/
assura/lib/libavview.so
*WARNING* dlopen: /apps/edatools/cadence/assura/tools.sun4v/assura/lib/
libavview.so: .so.1: /apps/edatools/cadence/psc_ic5141/tools.sun4v/
dfII/bin/icfb.exe: fatal: relocation error: file /apps/edatools/
cadence/assura/tools.sun4v/assura/lib/libavview.so: symbol
layersDefinePen: referenced symbol not found
*WARNING* Failed to open shared object file /apps/edatools/cadence/
assura/tools.sun4v/assura/lib/libavview.so
*WARNING* Assura has not been installed in this hierarchy.

We are using Solaris machine. we checked all paths and everyting is
correct.

I look forward to hearing from you.

Cheers,
 
Mohammadreza Pourakbar schrieb:
Dear All,

We installed Assura software based on installation guide and we
followed those steps. Unfortunately, when we run Layout XL, we could
not see the Assura menu and there are some warnings as following:

Load shared object file /apps/edatools/cadence/assura/tools.sun4v/
assura/lib/libavview.so
*WARNING* dlopen: /apps/edatools/cadence/assura/tools.sun4v/assura/lib/
libavview.so: .so.1: /apps/edatools/cadence/psc_ic5141/tools.sun4v/
dfII/bin/icfb.exe: fatal: relocation error: file /apps/edatools/
cadence/assura/tools.sun4v/assura/lib/libavview.so: symbol
layersDefinePen: referenced symbol not found
*WARNING* Failed to open shared object file /apps/edatools/cadence/
assura/tools.sun4v/assura/lib/libavview.so
*WARNING* Assura has not been installed in this hierarchy.

We are using Solaris machine. we checked all paths and everyting is
correct.

I look forward to hearing from you.

Cheers,
Click to expand...
Hi,

please check if you installed the correct Assura version for your IC
version. If you are working with IC5x you need to make sure to pick up
the CDBA Assura. If you Have IC6x you need the OA Assura version.
You probably try to run IC5x with Assura OA.

Marc
 
On Nov 11, 7:12 pm, Marc Heise <mhe...@NcOaSdPeAnMce.dotcalm> wrote:
Mohammadreza Pourakbar schrieb:



Dear All,

We installed Assura software based on installation guide and we
followed those steps. Unfortunately, when we run Layout XL, we could
not see the Assura  menu and there are some warnings as following:

Load shared object file /apps/edatools/cadence/assura/tools.sun4v/
assura/lib/libavview.so
*WARNING* dlopen: /apps/edatools/cadence/assura/tools.sun4v/assura/lib/
libavview.so: .so.1: /apps/edatools/cadence/psc_ic5141/tools.sun4v/
dfII/bin/icfb.exe: fatal: relocation error: file /apps/edatools/
cadence/assura/tools.sun4v/assura/lib/libavview.so: symbol
layersDefinePen: referenced symbol not found
*WARNING* Failed to open shared object file /apps/edatools/cadence/
assura/tools.sun4v/assura/lib/libavview.so
*WARNING* Assura has not been installed in this hierarchy.

We are using Solaris machine. we checked all paths and everyting is
correct.

I look forward to hearing from you.

Cheers,

Hi,

please check if you installed the correct Assura version for your IC
version. If you are working with IC5x you need to make sure to pick up
the CDBA Assura. If you Have IC6x you need the OA Assura version.
You probably try to run IC5x with Assura OA.

Marc
Click to expand...
Dear Marc,

Thank you for your quick reply. we have IC5141on Solaris 8. I wrote
"assura -v " in command line and this message came up.

Assura (tm) Physical Verification Version av3.2:production:dfII6.1.3
:IC6.1.3.500.4
Release 3.2_USR2

Copyright (c) Cadence Design Systems. All rights reserved.
@(#)$CDS: assura version av3.2:production:dfII6.1.3:IC6.1.3.500.4
12/24/2008 02:
28 (sfsol86) $
sub-version 3.2_USR2, integ signature 2008-12-19-0839

run on D506Sun8 from /apps/edatools/cadence/assura/tools.sun4v/assura/
bin/32bit/
assura on Thu Nov 12 21:01:37 2009

No mcf file specified


***** Assura terminated abnormally *****
Could you tell me what`s going on about Assura?

I look forward to hearing from you.

Reza
 
Mohammadreza Pourakbar schrieb:
On Nov 11, 7:12 pm, Marc Heise <mhe...@NcOaSdPeAnMce.dotcalm> wrote:
Mohammadreza Pourakbar schrieb:



Dear All,
We installed Assura software based on installation guide and we
followed those steps. Unfortunately, when we run Layout XL, we could
not see the Assura menu and there are some warnings as following:
Load shared object file /apps/edatools/cadence/assura/tools.sun4v/
assura/lib/libavview.so
*WARNING* dlopen: /apps/edatools/cadence/assura/tools.sun4v/assura/lib/
libavview.so: .so.1: /apps/edatools/cadence/psc_ic5141/tools.sun4v/
dfII/bin/icfb.exe: fatal: relocation error: file /apps/edatools/
cadence/assura/tools.sun4v/assura/lib/libavview.so: symbol
layersDefinePen: referenced symbol not found
*WARNING* Failed to open shared object file /apps/edatools/cadence/
assura/tools.sun4v/assura/lib/libavview.so
*WARNING* Assura has not been installed in this hierarchy.
We are using Solaris machine. we checked all paths and everyting is
correct.
I look forward to hearing from you.
Cheers,
Hi,

please check if you installed the correct Assura version for your IC
version. If you are working with IC5x you need to make sure to pick up
the CDBA Assura. If you Have IC6x you need the OA Assura version.
You probably try to run IC5x with Assura OA.

Marc

Dear Marc,

Thank you for your quick reply. we have IC5141on Solaris 8. I wrote
"assura -v " in command line and this message came up.

Assura (tm) Physical Verification Version av3.2:production:dfII6.1.3
:IC6.1.3.500.4
Release 3.2_USR2

Copyright (c) Cadence Design Systems. All rights reserved.
@(#)$CDS: assura version av3.2:production:dfII6.1.3:IC6.1.3.500.4
12/24/2008 02:
28 (sfsol86) $
sub-version 3.2_USR2, integ signature 2008-12-19-0839

run on D506Sun8 from /apps/edatools/cadence/assura/tools.sun4v/assura/
bin/32bit/
assura on Thu Nov 12 21:01:37 2009

No mcf file specified


***** Assura terminated abnormally *****
Could you tell me what`s going on about Assura?

I look forward to hearing from you.

Reza
Click to expand...
There you go.
Carefully check the 'assura-v' output and you will see "IC6.1.3". Now
reread my first reply. You need a different Assura Version.

Regards,
Marc
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top