Problem with Analog Artist Simulation

[Guenther Sohler]

Hallo Group,

I am simulating a circuit containing MOS Transistors.
For debugging I'd like to have the Current through a Drain
plotted. Unfortunately the MOS Transistor is not modelled as a plain
BSIM3V3 Model, but as a complex subcircuit. Therefore the current
through the drain is not available as such simple value, but would have
to be calculated as the sum of some (internal) subcircuit currents).
Is there still a way to handle the transistor as a simple symbol and
have the current through drain plotted(without tricks eg, inserting a 0V
voltage supply in series) ?

rds

 

[Svenn Are Bjerkem]

Guenther Sohler wrote:

Hallo Group,

I am simulating a circuit containing MOS Transistors.
For debugging I'd like to have the Current through a Drain
plotted. Unfortunately the MOS Transistor is not modelled as a plain
BSIM3V3 Model, but as a complex subcircuit. Therefore the current
through the drain is not available as such simple value, but would have
to be calculated as the sum of some (internal) subcircuit currents).
Is there still a way to handle the transistor as a simple symbol and
have the current through drain plotted(without tricks eg, inserting a 0V
voltage supply in series) ?

Can you use
save M1:currents?

There is also some buttons in the save all menu item in the Outputs menu in
VADE under Select device currents.

--
Svenn