Problem in ORCAD

[Chirag Desai]

Using orcad i have created a schematic in capture cis and i have even
completed design rules check ( it shows no warnings and errors). Now
when i try to create netlist it shows 53 errors of different
connections which are to be kept as it is. how to make this errors
disappear so that i can make a layout for the schematic.

 

[Ken Smith]

In article <65df8d5e.0403200937.7abb41b1@posting.google.com>,
Chirag Desai <chiragdesai23@hotmail.com> wrote:

Using orcad i have created a schematic in capture cis and i have even
completed design rules check ( it shows no warnings and errors). Now
when i try to create netlist it shows 53 errors of different
connections which are to be kept as it is. how to make this errors
disappear so that i can make a layout for the schematic.

Which error are you getting?

Orcad's rules checker only checks within a sheet. The netlist maker
follows signals from sheet to sheet. The usual problem is that you've
mixed inputs and output. If a signal is an output in a sheet symbol, it
also must be an output in the actual sheet. If not, the netlist maker
gets upset, outputs an error and doesn't make the netlist.


--
--
kensmith@rahul.net forging knowledge