Probing hierarchies in extracted views accross applications.

S

Svenn Are Bjerkem

Guest
Hi,

when the layouter has finished his work and I want to create an
extracted view to simulate I have a problem:

In the schematic the path is /IDUT/I1/I2/I3/signal In the extracted view
this signal change to /IDUT/I1|I2|I3(2)|signal. I want to set some
initial conditions on the net in schematic. That is basically no
problem, but how to get these propagated into the extracted view netlist?

Kind regards,
--
Svenn
 
The obvious way is to add a pin to the layout/schematic/symbol.

"Svenn Are Bjerkem" <svenn.are@bjerkem.de> wrote in message
news:cvv0ts$7tg$1@athen03.muc.infineon.com...
Hi,

when the layouter has finished his work and I want to create an
extracted view to simulate I have a problem:

In the schematic the path is /IDUT/I1/I2/I3/signal In the extracted view
this signal change to /IDUT/I1|I2|I3(2)|signal. I want to set some
initial conditions on the net in schematic. That is basically no
problem, but how to get these propagated into the extracted view netlist?

Kind regards,
--
Svenn
Click to expand...
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top