Probe Adaptors for HP 1631D logic analyzer (or Probes 10271A

[Hoi Wong]

Thanks a lot for the pointer. I really appreciat it


"Maurice" <Laaf@myrealbox.com> wrote in message
news:4cb66e05-6c69-4cfc-8af6-16199edbcec4@41g2000hsc.googlegroups.com...

Hoi,

10271-63201: Clip Asy-10 Chan
5959-0288: Grabber Assy

The grabber assembly are the individual clips for connecting each
wire. These or equivalent ones are reasonably easy to obtain.
You need:

10271-63201 (3 or 5) and 10272-63201 (2 or 0) for your 1631D. These
clips are very hard to find.

Thanks,

Maurice

 

[Maurice]

Hoi,

10271-63201: Clip Asy-10 Chan
5959-0288: Grabber Assy

The grabber assembly are the individual clips for connecting each
wire. These or equivalent ones are reasonably easy to obtain.
You need:

10271-63201 (3 or 5) and 10272-63201 (2 or 0) for your 1631D. These
clips are very hard to find.

Thanks,

Maurice

 

[Hoi Wong]

Hi Maurice,

Thanks. I looked at:

http://cp.literature.agilent.com/litweb/pdf/01630-90916.pdf
p.103

and I found two numbers:

10271-63201: Clip Asy-10 Chan
5959-0288: Grabber Assy

Which one describes the header that I'm looking for? I'm not sure that thing
is called a clip or grabber.

Thanks.

Cheers,
Hoi


"Maurice" <Laaf@myrealbox.com> wrote in message
news:8ca9de82-7d66-478f-af45-114a3ab702c1@64g2000hsw.googlegroups.com...

On Feb 16, 4:05 pm, "Hoi Wong" <wong...@stanford.edu> wrote:
I bought a HP 1631D logic analyzer and realized that they do not come
with
the ribbon cable/header for the probes' connector.

The model number for the probes 10271A, 10272A and they are both 11-pins.
Does any body know what are the model numbers of those
connectors/adaptors
and how can I find them?
Hoi,

These are fairly difficult and expensive to obtain. However, the
distance between the pins is 3.96mm (0.156") - and there are standard
Molex connectors which would fit.

11 pin Molex connector 09-50-7111 ( Mouser P/N 538-09-50-7111 )
Molex terminal 08-52-0113 ( Mouser P/N 538-08-52-0113 )

If you go to the mouser website with these #s, you can get to the
Molex website for datasheets.
I used these for a while, untill I got the real connectors through an
ePay auction. However, the connectors are rarer than the Logic
Analyzers.
You can find HP's numbers by going onto the Agilent website and
downloading the doc for this logic analyzer. I used to know the #'s,
but I sold my 1631D and bought a 1652B...

Maurice

 

[Maurice]

On Feb 16, 4:05 pm, "Hoi Wong" <wong...@stanford.edu> wrote:

I bought a HP 1631D logic analyzer and realized that they do not come with
the ribbon cable/header for the probes' connector.

The model number for the probes 10271A, 10272A and they are both 11-pins.
Does any body know what are the model numbers of those connectors/adaptors
and how can I find them?
Hoi,

These are fairly difficult and expensive to obtain. However, the
distance between the pins is 3.96mm (0.156") - and there are standard
Molex connectors which would fit.

11 pin Molex connector 09-50-7111 ( Mouser P/N 538-09-50-7111 )
Molex terminal 08-52-0113 ( Mouser P/N 538-08-52-0113 )

If you go to the mouser website with these #s, you can get to the
Molex website for datasheets.
I used these for a while, untill I got the real connectors through an
ePay auction. However, the connectors are rarer than the Logic
Analyzers.
You can find HP's numbers by going onto the Agilent website and
downloading the doc for this logic analyzer. I used to know the #'s,
but I sold my 1631D and bought a 1652B...

Maurice

 

[Hoi Wong]

I bought a HP 1631D logic analyzer and realized that they do not come with
the ribbon cable/header for the probes' connector.

The model number for the probes 10271A, 10272A and they are both 11-pins.
Does any body know what are the model numbers of those connectors/adaptors
and how can I find them?

Thanks in advance.

Cheers,
Hoi