Probably a stupid question...

[Dave]

But can anyone tell me if NiMH batteries can be overcharged? I imagine they
are probably no different from any other kind of battery, but I thought I
would ask just in case. I'm building something that will take a 9V NiMH
(which will actually be 8.4V), and am wondering if I need to give it a
regulated power supply to keep it charged, or will any old wall-wart do to
keep it topped off.

Thanks,

Dave

 

On Wed, 20 Jun 2012 13:27:49 -0500, "Dave" <db5151@hotmail.com> wrote:

But can anyone tell me if NiMH batteries can be overcharged? I imagine they
are probably no different from any other kind of battery, but I thought I
would ask just in case. I'm building something that will take a 9V NiMH
(which will actually be 8.4V), and am wondering if I need to give it a
regulated power supply to keep it charged, or will any old wall-wart do to
keep it topped off.

Thanks,

Dave

Hope your device doesn't need much power - 9 volt alkaline batteries
have very small AH capaility and "9 volt" NiMH have even less.

For maximum battery life, you need a charger that recognizes the
charge voltage curve changes and knows when to shut off. Neither a
regulated supply nor a wallwart will work well (as in resonable
battery life). I've seen a number of power tool batteries damaged by
the cheap chargers provided with the tool (Craftsman, Ryobi, etc).

 

[Jasen Betts]

On 2012-06-20, Dave <db5151@hotmail.com> wrote:

But can anyone tell me if NiMH batteries can be overcharged? I imagine they
are probably no different from any other kind of battery, but I thought I
would ask just in case. I'm building something that will take a 9V NiMH
(which will actually be 8.4V), and am wondering if I need to give it a
regulated power supply to keep it charged, or will any old wall-wart do to
keep it topped off.

lithium and lead-acid batteries can be charged to a voltage.

NiMH is harder to handle as the voltage profile as it charges is
very flat and reverses at the end.

So unless you can switch to a different battery chemistry charging
correctly will be tricky.


--
⚂⚃ 100% natural

 

[Robert Roland]

On Wed, 20 Jun 2012 13:27:49 -0500, "Dave" <db5151@hotmail.com> wrote:

But can anyone tell me if NiMH batteries can be overcharged?

Early NiMH batteries were very sensitive to overcharge. Nowadays, they
are much more tolerant, but still not as robust NiCd.

With a gentle trickle charge, expect the battery to last a few months
to a year.

I imagine they
are probably no different from any other kind of battery, but I thought I
would ask just in case.

Different battery chemistries are actually very different. A charger
made for one chemistry will generally not work with another. The
exception is that a NiMH charger will usually work with a NiCd
battery.

I'm building something that will take a 9V NiMH
(which will actually be 8.4V), and am wondering if I need to give it a
regulated power supply to keep it charged, or will any old wall-wart do to
keep it topped off.

Float charging a NiMh (or NiCd) battery is essentially not possible,
certainly not practical. The voltage is affected by numerous
variables, and the voltage would have to be extremely accurate.

Depending on your application, a different solution might be better.

A primary (non-rechargeable) battery might be applicable. If you get a
lithium based one, they have excellent shelf life.

For a more dynamic application, perhaps a supercap? Here's an idea:
http://hackaday.com/2005/12/06/supercap-9v-battery/
--
RoRo

 

[Dave]

THANKS all, for the posts in answer to my question. Will look at Ni-cds as
a possibility, but more than likely will simply use standard alkaline
batteries and take them out of the circkuit while the item is not in use,
sitting in its cradle. Do appreciate the help.

Dave

"Dave" <db5151@hotmail.com> wrote in message
news:17ydnaqXaqapi3_SnZ2dnUVZ_u6dnZ2d@posted.internetamerica...

But can anyone tell me if NiMH batteries can be overcharged? I imagine
they are probably no different from any other kind of battery, but I
thought I would ask just in case. I'm building something that will take a
9V NiMH (which will actually be 8.4V), and am wondering if I need to give
it a regulated power supply to keep it charged, or will any old wall-wart
do to keep it topped off.

Thanks,

Dave

 

[Ian Field]

"Dave" <db5151@hotmail.com> wrote in message
news:8sudnd2IRubi53nSnZ2dnUVZ_vudnZ2d@posted.internetamerica...

THANKS all, for the posts in answer to my question. Will look at Ni-cds
as a possibility,

AFAIK NiCd is exempt from EU RoHS legislation, but looking through various
catalogues for a couple of AA cells for my shaver - they seem to have
virtually disapeared.

Voltage sensing chargers were starting to come onto the market just as NiCd
cells were starting to get scarce, the NiMh cells have a similar terminal
voltage dip at full charge, but its more subtle than with NiCd cells and
took the manufacturers a while to catch up with reliable chargers.

The correct (dip sensing) chargers for 9V block batteries are more complex,
more expensive & unreliable compared to chargers with a row of single-cell
compartments.

A holder for 6x AAA isn't that much bigger than a PP3 and you get a huge
increase in Ah capacity, and reliability with rechargeables.