Pro PCB & Simulation below $300

[Mark]

Last month I ordered a Professional PCB Design Software together with
the Simulation Software under company special at $295. Both these
softwares are great for their price. Any one looking for such
software packages should checkout following website.

http://www.circuitcreator.com

I am very satisfied and highly recommend these packages. If they
still have the special, you can save lot.

Thanks,
Mark

 

[Spehro Pefhany]

On 22 Jan 2004 08:13:25 -0800, mark@touchpadswitches.com (Mark) wrote:

Last month I ordered a Professional PCB Design Software together with
the Simulation Software under company special at $295. Both these
softwares are great for their price. Any one looking for such
software packages should checkout following website.

http://www.spamcreator.com

I am very satisfied and highly recommend these packages. If they
still have the special, you can save lot.

Thanks,
Mark

You ordered it from yourself, Mark?

Best regards,
Spehro Pefhany
--
"it's the network..." "The Journey is the reward"
speff@interlog.com Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog Info for designers: http://www.speff.com

 

[Leon Heller]

Hello Mark,

What is so good about this software, in detail.

Regards,

Leon



Mark wrote:

Last month I ordered a Professional PCB Design Software together with
the Simulation Software under company special at $295. Both these
softwares are great for their price. Any one looking for such
software packages should checkout following website.

http://www.circuitcreator.com

I am very satisfied and highly recommend these packages. If they
still have the special, you can save lot.

Thanks,
Mark

--
Leon Heller, G1HSM
Email: aqzf13@dsl.pipex.com
My low-cost Philips LPC210x ARM development system:
http://www.geocities.com/leon_heller/lpc2104.html

 

[Bob Stephens]

On 22 Jan 2004 08:13:25 -0800, Mark wrote:

Last month I ordered a Professional PCB Design Software together with
the Simulation Software under company special at $295. Both these
softwares are great for their price. Any one looking for such
software packages should checkout following website.

http://www.circuitcreator.com

I am very satisfied and highly recommend these packages. If they
still have the special, you can save lot.

Thanks,
Mark

Die, spamminating cretin!

 

[balistic]

If any one wants simulation software for under $300
Just take a look at spice3 - Thats FREE
Use it together with eagle and you've got a graphical designer for spice3 +
pcb designer also FREE for students and hobbyists

Mark wrote:

Last month I ordered a Professional PCB Design Software together with
the Simulation Software under company special at $295. Both these
softwares are great for their price. Any one looking for such
software packages should checkout following website.

http://www.circuitcreator.com

I am very satisfied and highly recommend these packages. If they
still have the special, you can save lot.

Thanks,
Mark

 

[Leon Heller]

Mark wrote:

Last month I ordered a Professional PCB Design Software together with
the Simulation Software under company special at $295. Both these
softwares are great for their price. Any one looking for such
software packages should checkout following website.

http://www.circuitcreator.com

I am very satisfied and highly recommend these packages. If they
still have the special, you can save lot.

I sent 'Mark' an email asking him what was so good about the software,
but didn't get a reply. It didn't bounce, either. I would have thought
that he would be very keen to tell me about it.

Leon
--
Leon Heller, G1HSM
Email: aqzf13@dsl.pipex.com
My low-cost Philips LPC210x ARM development system:
http://www.geocities.com/leon_heller/lpc2104.html

 

[Leon Heller]

Leon Heller wrote:

Mark wrote:

Last month I ordered a Professional PCB Design Software together with
the Simulation Software under company special at $295. Both these
softwares are great for their price. Any one looking for such
software packages should checkout following website.

http://www.circuitcreator.com

I am very satisfied and highly recommend these packages. If they
still have the special, you can save lot.


I sent 'Mark' an email asking him what was so good about the software,
but didn't get a reply. It didn't bounce, either. I would have thought
that he would be very keen to tell me about it.

Still no reply from 'Mark' - he must have seen my email and the above
post. I'm beginning to have doubts about his existence.

Leon
--
Leon Heller, G1HSM
Email: aqzf13@dsl.pipex.com
My low-cost Philips LPC210x ARM development system:
http://www.geocities.com/leon_heller/lpc2104.html

 

[Paul Burridge]

On Fri, 23 Jan 2004 10:50:21 +0000, Leon Heller <aqzf13@dsl.pipex.com>
wrote:

Still no reply from 'Mark' - he must have seen my email and the above
post. I'm beginning to have doubts about his existence.

If he doesn't exist, then who wrote Circuit Creator and set up the Web
site? ;-)
--

My opinion is worth what you've paid for it.

 

[Bob Stephens]

On Fri, 23 Jan 2004 13:45:03 +0000, Paul Burridge wrote:

On Fri, 23 Jan 2004 10:50:21 +0000, Leon Heller <aqzf13@dsl.pipex.com
wrote:

Still no reply from 'Mark' - he must have seen my email and the above
post. I'm beginning to have doubts about his existence.

If he doesn't exist, then who wrote Circuit Creator and set up the Web
site? ;-)

Pee Wee Herman and Gilbert Gottfried's love child.

 

[Ross Mac]

"Leon Heller" <aqzf13@dsl.pipex.com> wrote in message
news:4010fc6e$0$23462$cc9e4d1f@news.dial.pipex.com...

Leon Heller wrote:


Mark wrote:

Last month I ordered a Professional PCB Design Software together with
the Simulation Software under company special at $295. Both these
softwares are great for their price. Any one looking for such
software packages should checkout following website.

http://www.circuitcreator.com

I am very satisfied and highly recommend these packages. If they
still have the special, you can save lot.


I sent 'Mark' an email asking him what was so good about the software,
but didn't get a reply. It didn't bounce, either. I would have thought
that he would be very keen to tell me about it.

Still no reply from 'Mark' - he must have seen my email and the above
post. I'm beginning to have doubts about his existence.

Leon
--
Leon Heller, G1HSM
Email: aqzf13@dsl.pipex.com
My low-cost Philips LPC210x ARM development system:
http://www.geocities.com/leon_heller/lpc2104.html

Maybe Mark is harvesting email addys. Nothing surprises me anymore when it

comes to the spammers, spoofers and phishers....crooks...all of them!

 

[Spehro Pefhany]

On Fri, 23 Jan 2004 10:50:21 +0000, the renowned Leon Heller
<aqzf13@dsl.pipex.com> wrote:

Leon Heller wrote:


Mark wrote:

Last month I ordered a Professional PCB Design Software together with
the Simulation Software under company special at $295. Both these
softwares are great for their price. Any one looking for such
software packages should checkout following website.

http://www.circuitcreator.com

I am very satisfied and highly recommend these packages. If they
still have the special, you can save lot.


I sent 'Mark' an email asking him what was so good about the software,
but didn't get a reply. It didn't bounce, either. I would have thought
that he would be very keen to tell me about it.

Still no reply from 'Mark' - he must have seen my email and the above
post. I'm beginning to have doubts about his existence.

"Mark" may, in fact, be a pseudonym for Raj Shah.

Best regards,
Spehro Pefhany
--
"it's the network..." "The Journey is the reward"
speff@interlog.com Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog Info for designers: http://www.speff.com

 

[Leon Heller]

Spehro Pefhany wrote:

On Fri, 23 Jan 2004 10:50:21 +0000, the renowned Leon Heller
aqzf13@dsl.pipex.com> wrote:



Leon Heller wrote:


Mark wrote:


Last month I ordered a Professional PCB Design Software together with
the Simulation Software under company special at $295. Both these
softwares are great for their price. Any one looking for such
software packages should checkout following website.

http://www.circuitcreator.com

I am very satisfied and highly recommend these packages. If they
still have the special, you can save lot.


I sent 'Mark' an email asking him what was so good about the software,
but didn't get a reply. It didn't bounce, either. I would have thought
that he would be very keen to tell me about it.

Still no reply from 'Mark' - he must have seen my email and the above
post. I'm beginning to have doubts about his existence.


"Mark" may, in fact, be a pseudonym for Raj Shah.

I can't believe that the President of a reputable company would do
something naughty like that! I have emailed AMS with a copy of this
thread and asked them to put me in touch with 'Mark', that should
resolve the matter.

Leon
--
Leon Heller, G1HSM
Email: aqzf13@dsl.pipex.com
My low-cost Philips LPC210x ARM development system:
http://www.geocities.com/leon_heller/lpc2104.html