Printing schematics in composer!!

[- A -]

Hello,

I had to know, how I can print schematics done using Cadence
Composer!! THe schematic is big. How do I get the whole thing to be
printed with good zoom.

Thanks in advance for your suggestions..

- A -

 

[Kumar]

If you already have a printer installed on your system, click on Design
--> Plot--> Submit as stated in the above post.
Later, in the window that pops up, you should see a button labeled
"options". Once you click on it, a window pops up where you can select
the plot size or select 'zoom to fit'.

Hope this helps.

 

[John Gianni]

Kumar wrote:

If you already have a printer installed on your system, click on
"Design --> Plot --> Submit" as stated in the above post.

You don't even need a printer installed on the system.

As stated in many prior posts, a user can print to PostScript or HPGL.
Then transfer the files to any machine that does have a
printer/plotter.

In addition, you can then convert the PostScript or HPGL (or other
format) to many other formats as needed, e.g., DXF or Microsoft Word as
previously explained in many comp.cad.cadence postings.

I've even created entire clickable traversable schematic
representations on Windows PCs by editing the PDF to add links, e.g.,
if you click on instance A, it takes you down to the master and if you
click on the center of the master, it takes you back to the top of the
hierarchy, etc.

John Gianni
"Nothing I post to the USENET is sanctioned prior by my employer."

 

[John Gianni]

From a DFII schematic:
Design -> Plot -> Submit