print form setup

Hi All,

I just registered today to this usefull group.

I would to know if someone has experiences and tips regarding the
print form. I want to setup the form by default by either switch off
the header printing or print size. Is it possible to setup these
properties by default through .cdsinit file for example or other file?

Thanks in advance,
Fabian

 

[Riad KACED]

Hi Fabian,

Yes it is possible to setup these by Skill.
If you are interested in plotting schematics, then you may give a look
at the schPlotOptions variable.
There are loads of posts dealing with this matter. A quick search in
this forum returned the following posts:
http://groups.google.com/group/comp.cad.cadence/search?group=comp.cad.cadence&q=schPlotOptions&qt_g=Search+this+group

All the above results are answering your question. I've randomly
selected couple of them to make your life easier

http://groups.google.com/group/comp.cad.cadence/browse_thread/thread/b889291a5382cf95/2ef44986806c2e8d?lnk=gst&q=schPlotOptions#2ef44986806c2e8d
http://groups.google.com/group/comp.cad.cadence/browse_thread/thread/2b30ae9786442843/58199f3b78056d3d?lnk=gst&q=schPlotOptions#58199f3b78056d3d

Cheers,
Riad.