primitives library for Cadence IC5

S

Svilen

Guest
Hi,

Can someone explain how to create primitive symbols for IC5 cadence
virtuoso. I have models for transistors, resistors, caps etc. but I
don't have the symbols of those to use in the schematic drawing and
then to netlist for simulation. I need to create the symbols, but
don't know how.
The models are not for spectre and are organized as subcircuits.
Any help would be appreciated. Or at least point to a documentation
where I can read about this.
Thanks

Svilen
 
Svilen:
See:
tools/dfII/etc/cdslib/artist/analogLib

See:
tools/dfII/src/artist/analogLib/makeAnalogLib
---
Erik

sminchev@yahoo.com (Svilen) wrote in message news:<73a35da8.0410111407.49597800@posting.google.com>...
Hi,

Can someone explain how to create primitive symbols for IC5 cadence
virtuoso. I have models for transistors, resistors, caps etc. but I
don't have the symbols of those to use in the schematic drawing and
then to netlist for simulation. I need to create the symbols, but
don't know how.
The models are not for spectre and are organized as subcircuits.
Any help would be appreciated. Or at least point to a documentation
where I can read about this.
Thanks

Svilen
Click to expand...
 
Can you also point me to a document explaining all this?

erikwanta@starband.net (Erik Wanta) wrote in message news:<84018314.0410120354.1fb23936@posting.google.com>...
Svilen:
See:
tools/dfII/etc/cdslib/artist/analogLib

See:
tools/dfII/src/artist/analogLib/makeAnalogLib
---
Erik

sminchev@yahoo.com (Svilen) wrote in message news:<73a35da8.0410111407.49597800@posting.google.com>...
Hi,

Can someone explain how to create primitive symbols for IC5 cadence
virtuoso. I have models for transistors, resistors, caps etc. but I
don't have the symbols of those to use in the schematic drawing and
then to netlist for simulation. I need to create the symbols, but
don't know how.
The models are not for spectre and are organized as subcircuits.
Any help would be appreciated. Or at least point to a documentation
where I can read about this.
Thanks

Svilen
Click to expand...
 
Svilen:
analogLib is a library provided by Cadence that has all the primitive
symbols. So, you can place down a nmos and put your model in the
model field...

See:
/doc/analoglibref/analoglibref.pdf
--
Erik

sminchev@yahoo.com (Svilen) wrote in message news:<73a35da8.0410121451.186a28@posting.google.com>...
Can you also point me to a document explaining all this?

erikwanta@starband.net (Erik Wanta) wrote in message news:<84018314.0410120354.1fb23936@posting.google.com>...
Svilen:
See:
tools/dfII/etc/cdslib/artist/analogLib

See:
tools/dfII/src/artist/analogLib/makeAnalogLib
---
Erik

sminchev@yahoo.com (Svilen) wrote in message news:<73a35da8.0410111407.49597800@posting.google.com>...
Hi,

Can someone explain how to create primitive symbols for IC5 cadence
virtuoso. I have models for transistors, resistors, caps etc. but I
don't have the symbols of those to use in the schematic drawing and
then to netlist for simulation. I need to create the symbols, but
don't know how.
The models are not for spectre and are organized as subcircuits.
Any help would be appreciated. Or at least point to a documentation
where I can read about this.
Thanks

Svilen
Click to expand...
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top