Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
On Fri, 3 Apr 2015 05:19:01 -0700 (PDT), "M. Hamed"
mhdpublic@gmail.com> wrote:
Want to see how temperature affects certain electronics components. I know
I can use freeze spray to drive temperature down. What do I do to raise
temperature? Tried soldering iron with a piece of metal attached (so the
IC won't melt) but seems the metal was dissipating the heat so well.
Heat gun.
Want to see how temperature affects certain electronics components. I know I can use freeze spray to drive temperature down. What do I do to raise temperature? Tried soldering iron with a piece of metal attached (so the IC won't melt) but seems the metal was dissipating the heat so well.
On Fri, 3 Apr 2015 05:19:01 -0700 (PDT), "M. Hamed"
mhdpublic@gmail.com> wrote:
Want to see how temperature affects certain electronics components. I know I can use freeze spray to drive temperature down. What do I do to raise temperature? Tried soldering iron with a piece of metal attached (so the IC won't melt) but seems the metal was dissipating the heat so well.
Heat gun.
--
John Larkin Highland Technology, Inc
picosecond timing laser drivers and controllers
jlarkin att highlandtechnology dott com
http://www.highlandtechnology.com
On Friday, April 3, 2015 at 10:39:58 AM UTC-4, John Larkin wrote:
On Fri, 3 Apr 2015 05:19:01 -0700 (PDT), "M. Hamed"
mhdpublic@gmail.com> wrote:
Want to see how temperature affects certain electronics components. I know I can use freeze spray to drive temperature down. What do I do to raise temperature? Tried soldering iron with a piece of metal attached (so the IC won't melt) but seems the metal was dissipating the heat so well.
Heat gun.
Yeah but be careful, you can melt solder with it.
George H.
On Tue, 7 Apr 2015, George Herold wrote:
On Friday, April 3, 2015 at 10:39:58 AM UTC-4, John Larkin wrote:
On Fri, 3 Apr 2015 05:19:01 -0700 (PDT), "M. Hamed"
mhdpublic@gmail.com> wrote:
Want to see how temperature affects certain electronics components. I know I can use freeze spray to drive temperature down. What do I do to raise temperature? Tried soldering iron with a piece of metal attached (so the IC won't melt) but seems the metal was dissipating the heat so well.
Heat gun.
Yeah but be careful, you can melt solder with it.
George H.
Yes. Start with a hair dryer. I once bought one small and cheap, never
used it for my hair, but it has been real handy for when I needed a small
source of heat. I was just using it recently to set some epoxy.
But I've never seen it melt solder, so it seems acceptable as a source of
heat to find a problem.
Michael
On Tue, 7 Apr 2015 22:57:36 -0400, Michael Black <et472@ncf.ca> wrote:
On Tue, 7 Apr 2015, George Herold wrote:
On Friday, April 3, 2015 at 10:39:58 AM UTC-4, John Larkin wrote:
On Fri, 3 Apr 2015 05:19:01 -0700 (PDT), "M. Hamed"
mhdpublic@gmail.com> wrote:
Want to see how temperature affects certain electronics components. I know I can use freeze spray to drive temperature down. What do I do to raise temperature? Tried soldering iron with a piece of metal attached (so the IC won't melt) but seems the metal was dissipating the heat so well.
Heat gun.
Yeah but be careful, you can melt solder with it.
George H.
Yes. Start with a hair dryer. I once bought one small and cheap, never
used it for my hair, but it has been real handy for when I needed a small
source of heat. I was just using it recently to set some epoxy.
But I've never seen it melt solder, so it seems acceptable as a source of
heat to find a problem.
Michael
If you're trying to isolate a temperature problem to a single part,
you can freeze-spray a q-tip and touch it to pretty small parts.