Power Supply Board For FREE

G

Gary Lecomte

Guest
This is a Voltage and Current Regulated Supply with the ability to go
to down to Zero Volts. It is not super Quality, but Definately good
for Beginners or anyone wanting a Simple Design.
So, If interested in a Reasonably Good, but Simple Power Supply
Project and a
Chance to Win my Assembled Proto For FREE, This Weekend.
(Also Mailed Free of Charge to the winner)
Go to: http://www3.telus.net/chemelec/Projects/Projects.htm

For Details, Click on the "Power Supply" Project.

Take care......Gary
 
Gary Lecomte wrote:
This is a Voltage and Current Regulated Supply with the ability to go
to down to Zero Volts. It is not super Quality, but Definately good
for Beginners or anyone wanting a Simple Design.
So, If interested in a Reasonably Good, but Simple Power Supply
Project and a
Chance to Win my Assembled Proto For FREE, This Weekend.
(Also Mailed Free of Charge to the winner)
Go to: http://www3.telus.net/chemelec/Projects/Projects.htm

For Details, Click on the "Power Supply" Project.

Take care......Gary
Click to expand...
Why would you want to reverse bias a tantalum cap???
mike

--
Return address is VALID.
Bunch of stuff For Sale and Wanted at the link below.
Toshiba & Compaq LiIon Batteries, Test Equipment
Honda CB-125S $800 in PDX
Yaesu FTV901R Transverter, 30pS pulser
Tektronix Concept Books, spot welding head...
http://www.geocities.com/SiliconValley/Monitor/4710/
 
mike <spamme0@juno.com> wrote in message news:<40883E52.3080209@juno.com>...
Gary Lecomte wrote:
This is a Voltage and Current Regulated Supply with the ability to go
to down to Zero Volts. It is not super Quality, but Definately good
for Beginners or anyone wanting a Simple Design.
So, If interested in a Reasonably Good, but Simple Power Supply
Project and a
Chance to Win my Assembled Proto For FREE, This Weekend.
(Also Mailed Free of Charge to the winner)
Go to: http://www3.telus.net/chemelec/Projects/Projects.htm

For Details, Click on the "Power Supply" Project.

Take care......Gary

Why would you want to reverse bias a tantalum cap???
mike
Click to expand...
Where did I do That? I don't see it.

Gary
 
"Gary Lecomte" <chemelec@hotmail.com> wrote in message
news:ca76d1a9.0404221901.1683efbc@posting.google.com...
mike <spamme0@juno.com> wrote in message
news:<40883E52.3080209@juno.com>...
Gary Lecomte wrote:
This is a Voltage and Current Regulated Supply with the ability to go
to down to Zero Volts. It is not super Quality, but Definately good
for Beginners or anyone wanting a Simple Design.
So, If interested in a Reasonably Good, but Simple Power Supply
Project and a
Chance to Win my Assembled Proto For FREE, This Weekend.
(Also Mailed Free of Charge to the winner)
Go to: http://www3.telus.net/chemelec/Projects/Projects.htm

For Details, Click on the "Power Supply" Project.

Take care......Gary

Why would you want to reverse bias a tantalum cap???
mike

Where did I do That? I don't see it.

Gary
Click to expand...
Nor do I. I would like to see a few 0.1uF cap's at input and output of the
reg IC's though.

Cheers.

Ken
 
"Ken Taylor" <ken123@xtra.co.nz> wrote in message news:<c6a18t$98c19$1@ID-76636.news.uni-berlin.de>...
"Gary Lecomte" <chemelec@hotmail.com> wrote in message
news:ca76d1a9.0404221901.1683efbc@posting.google.com...
mike <spamme0@juno.com> wrote in message
news:<40883E52.3080209@juno.com>...
Gary Lecomte wrote:
This is a Voltage and Current Regulated Supply with the ability to go
to down to Zero Volts. It is not super Quality, but Definately good
for Beginners or anyone wanting a Simple Design.
So, If interested in a Reasonably Good, but Simple Power Supply
Project and a
Chance to Win my Assembled Proto For FREE, This Weekend.
(Also Mailed Free of Charge to the winner)
Go to: http://www3.telus.net/chemelec/Projects/Projects.htm

For Details, Click on the "Power Supply" Project.

Take care......Gary

Why would you want to reverse bias a tantalum cap???
mike

Where did I do That? I don't see it.

Gary

Nor do I. I would like to see a few 0.1uF cap's at input and output of the
reg IC's though.

Cheers.

Ken
Click to expand...
Hi Ken, I tend to use 1 uF tantalums as I have thousands of them and
find they work quite well. But if you wish to Substitute .1 uF caps in
place of some or all of them, they will work as well, Maybe better in
RF Situations.

There are Improvements that can be made, but This is definately close
to a Minimum Parts count for a supply that is both current and voltage
regulated as well as the ability to go down to Zero volts. Great for
the Beginner.

This design is not totally unique, but better than most I have seen on
the net.

My hope is it is Cost Effective and Useful to some of these persons.

Take care.......Gary
Take care.........Gary
 
Gary Lecomte wrote:
mike <spamme0@juno.com> wrote in message news:<40883E52.3080209@juno.com>...

Gary Lecomte wrote:

This is a Voltage and Current Regulated Supply with the ability to go
to down to Zero Volts. It is not super Quality, but Definately good
for Beginners or anyone wanting a Simple Design.
So, If interested in a Reasonably Good, but Simple Power Supply
Project and a
Chance to Win my Assembled Proto For FREE, This Weekend.
(Also Mailed Free of Charge to the winner)
Go to: http://www3.telus.net/chemelec/Projects/Projects.htm

For Details, Click on the "Power Supply" Project.

Take care......Gary

Why would you want to reverse bias a tantalum cap???
mike


Where did I do That? I don't see it.

Gary
Click to expand...
This group seems to like "where's waldo" types of exercises.

If nobody else finds it, I'll post what I think. Maybe I'm wrong...

Hint: There are only four places to look. How hard can that be? ;-)

Just curious about the current limit behavior. I'm kinda worried about
what happens when the input voltage to the second IC drops below what
it takes to make the chip work. How's the transient response in and
out of current limit? Try a plethora of load lines and rep rates on
your transient generator.
mike


--
Return address is VALID.
Bunch of stuff For Sale and Wanted at the link below.
Toshiba & Compaq LiIon Batteries, Test Equipment
Honda CB-125S $800 in PDX
Yaesu FTV901R Transverter, 30pS pulser
Tektronix Concept Books, spot welding head...
http://www.geocities.com/SiliconValley/Monitor/4710/
 
"Gary Lecomte" <chemelec@hotmail.com> wrote in message
news:ca76d1a9.0404221901.1683efbc@posting.google.com...
Why would you want to reverse bias a tantalum cap???
mike

Where did I do That? I don't see it.
Click to expand...
Take a look at what happens when your variable resistor is set to 0.
 
chemelec@hotmail.com (Gary Lecomte) wrote in message news:<ca76d1a9.0404221901.1683efbc@posting.google.com>...
mike <spamme0@juno.com> wrote in message news:<40883E52.3080209@juno.com>...
Gary Lecomte wrote:
This is a Voltage and Current Regulated Supply with the ability to go
to down to Zero Volts. It is not super Quality, but Definately good
snip
Take care......Gary

Why would you want to reverse bias a tantalum cap???
mike

Where did I do That? I don't see it.

Gary
Click to expand...
In order for the output to get to 0 V the adj lead must be -1.25 V
with respect to ground. This reverse biases the cap on the adj lead.
Use a ceramic here.

Ryan
 
"Gary Lecomte" <chemelec@hotmail.com> wrote in message
news:ca76d1a9.0404230451.66f0e921@posting.google.com...
"Ken Taylor" <ken123@xtra.co.nz> wrote in message
news:<c6a18t$98c19$1@ID-76636.news.uni-berlin.de>...
"Gary Lecomte" <chemelec@hotmail.com> wrote in message
news:ca76d1a9.0404221901.1683efbc@posting.google.com...
mike <spamme0@juno.com> wrote in message
news:<40883E52.3080209@juno.com>...
Gary Lecomte wrote:
This is a Voltage and Current Regulated Supply with the ability to
go
to down to Zero Volts. It is not super Quality, but Definately
good
for Beginners or anyone wanting a Simple Design.
So, If interested in a Reasonably Good, but Simple Power Supply
Project and a
Chance to Win my Assembled Proto For FREE, This Weekend.
(Also Mailed Free of Charge to the winner)
Go to: http://www3.telus.net/chemelec/Projects/Projects.htm

For Details, Click on the "Power Supply" Project.

Take care......Gary

Why would you want to reverse bias a tantalum cap???
mike

Where did I do That? I don't see it.

Gary

Nor do I. I would like to see a few 0.1uF cap's at input and output of
the
reg IC's though.

Cheers.

Ken

Hi Ken, I tend to use 1 uF tantalums as I have thousands of them and
find they work quite well. But if you wish to Substitute .1 uF caps in
place of some or all of them, they will work as well, Maybe better in
RF Situations.

There are Improvements that can be made, but This is definately close
to a Minimum Parts count for a supply that is both current and voltage
regulated as well as the ability to go down to Zero volts. Great for
the Beginner.

This design is not totally unique, but better than most I have seen on
the net.

My hope is it is Cost Effective and Useful to some of these persons.

Take care.......Gary
Take care.........Gary
Click to expand...
I'm seeing double today! :)

Check the spec's for the beast - you should use 0.1's as well as a tantalum.
Nice pick-up Mike, I'm flat out reading that late at night, let alone
interpreting! :)

Ken
 
Ken Taylor wrote:
[snip]

Go to: http://www3.telus.net/chemelec/Projects/Projects.htm

For Details, Click on the "Power Supply" Project.

Take care......Gary

Why would you want to reverse bias a tantalum cap???
mike

Where did I do That? I don't see it.

Gary

Nor do I. I would like to see a few 0.1uF cap's at input and output of the
reg IC's though.
Click to expand...
Looks to me as if the 1 uF tantalum from the ADJ terminal to ground is
seeing anything from the max V minus 1.2V, all the way down to neg 1.2V.
So this cap had better be non-polarized.

Cheers.

Ken
Click to expand...
 
"Walter Harley" <walterh@cafewalterNOSPAM.com> wrote in message news:<c6binf$j7t$0@216.39.172.65>...
"Gary Lecomte" <chemelec@hotmail.com> wrote in message
news:ca76d1a9.0404221901.1683efbc@posting.google.com...
Why would you want to reverse bias a tantalum cap???
mike

Where did I do That? I don't see it.

Take a look at what happens when your variable resistor is set to 0.
Click to expand...
OK, I see, but after 2 days it didn't affect it and a good portion of
the time it was at zero. In any case, that tantalum, or all of them
can be replaced with .1 uF caps.

Gary
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top