post processing AMS results with OCEAN

[cyseok]

When I simulate AMS circuits in ADE, "psf.trn" for transient
simulation is generated. But this result cannot be accessed by OCEAN.

Then, I include the following spectre script to create "tran.tran"
results.

saveOptions options rawfmt=psfbin

Though "tran.tran" was created, this also cannot be accessed by OCEAN
command, "v(/"OUT")".

Error messase looks like the following.

"*Error* _amsNMForwardMap: argumnet #1 should be a defstruct ...."

When getData was used, the result is "nil".

 

[Andrew Beckett]

cyseok wrote, on 02/28/08 00:16:

When I simulate AMS circuits in ADE, "psf.trn" for transient
simulation is generated. But this result cannot be accessed by OCEAN.

Then, I include the following spectre script to create "tran.tran"
results.

saveOptions options rawfmt=psfbin

Though "tran.tran" was created, this also cannot be accessed by OCEAN
command, "v(/"OUT")".

Error messase looks like the following.

"*Error* _amsNMForwardMap: argumnet #1 should be a defstruct ...."

When getData was used, the result is "nil".

What version (icfb -W) are you using? You should be able to read AMS results in
OCEAN, so provided you're using any recent IC5141 USR, you should be OK (I've
certainly done this - in fact it's covered in the OCEAN class that I developed).

Regards,

Andrew.