Possible to edit spectre netlist

[Kay Hammer]

Hi there,

I have the following problem: during netlist extraction, spectre changes all
mos model names into the
same one, for example nmos and pmos both to mos.
At the time, I don't know how to solve the problem, so I ask myself whether
I can edit the netlist
in the Affirma Analog Circuit Design Environment. Is this possible or not?
Otherwise I can edit the extracted netlist an run spectre from the command
line, but this is less comfortable.

Rgds, Kay Hammer

 

"Kay" == Kay Hammer <kham@hrz.tu-chemnitz.de> writes:

Kay> Hi there, I have the following problem: during netlist
Kay> extraction, spectre changes all mos model names into the same
Kay> one, for example nmos and pmos both to mos. At the time, I
Kay> don't know how to solve the problem, so I ask myself whether I
Kay> can edit the netlist in the Affirma Analog Circuit Design
Kay> Environment. Is this possible or not? Otherwise I can edit the
Kay> extracted netlist an run spectre from the command line, but
Kay> this is less comfortable.

Kay> Rgds, Kay Hammer

Hi Kay

Please see my yesterdays post on changing model names.

Satya


--
Remove XXX and YYY to get my address