plotting sim results for corner runs in ADEXL

[yvk]

Hi,
I create corners using sections of model file in corners setup dialogBox,
and use the design variables vddmin, vddmax, tempmin, tempmax to create all the PVT combinations.

Doing so by default evalautes and plots the calculator expr. result w.r.t 'vdd' or 'temperature'.

I manually go and change the axis to Corner name using swap axis everytime.

How to set the default X-axis as the corner(PVT corner combination) name for all the sims.

Thanks,
Vamshi

 

[Andrew Beckett]

On 01/10/13 15:59, yvk wrote:

Hi,
I create corners using sections of model file in corners setup dialogBox,
and use the design variables vddmin, vddmax, tempmin, tempmax to create all the PVT combinations.

Doing so by default evalautes and plots the calculator expr. result w.r.t 'vdd' or 'temperature'.

I manually go and change the axis to Corner name using swap axis everytime.

How to set the default X-axis as the corner(PVT corner combination) name for all the sims.

Thanks,
Vamshi

Currently, you can't. The closest is that you may be able to set it up
once, and then use the "Refresh" mode of plotting in the plot options -
if you do this, it tries to re-use your graph arrangement for subsequent
simulations.

Regards,

Andrew.