plotting gm Vs. time from a PSS simulation

Hi all,

the known method to have Virtuoso save (time-varying) OP is to use a save.scs file with save statements in it, then attach it as it were a lib file.

This works fine for tran and env simulations, but somehow I do not get proper results from PSS. More specifically (and wierdly), if I

perform HB : I do not get *any* info

perform Shooting : I get some DC value of the gm

This, of course, by looking into the _td results folder.

Any experience with this?

Thank you in advance,

Michele

 

[Andrew Beckett]

On 11/01/13 16:03, michele.ancis@gmail.com wrote:

Hi all,

the known method to have Virtuoso save (time-varying) OP is to use a

save.scs file with save statements in it, then attach it as it were a
lib file.

This works fine for tran and env simulations, but somehow I do not
get
proper results from PSS. More specifically (and wierdly), if I

perform HB : I do not get *any* info

perform Shooting : I get some DC value of the gm

This, of course, by looking into the _td results folder.

Any experience with this?

Thank you in advance,

Michele

http://www.cadence.com/Community/forums/p/27648/1328559.aspx#1328559