PLEASE help, SONY VCR problem

[Gary Noland]

Hi,
I'm having some problems with my Sony VCR. It's model # SLV-750HF
(one of the best VCRs Sony has ever manufactured). The problem is
that the "high speed rewind" does not work. The regular rewind,
however seems to work for a few seconds but then the unit completely
stops. Here are two sets of error codes that I receive: LH 16M 02S
and LH 07M 02S (please note that the H signifies hours, M is minutes,
and S is seconds. I would greatly appreciate any help.
Thanks in advance,

Gary Noland
GaryNoland99@yahoo.com

 

[Sofie]

Gary Noland:
More than likely one of the reel motion sensors under the supply reel and
the T.U. reel are faulty...... I usually replace both..... these are IR
emitter/detector assemblies and are readily available from most suppliers.
While you are in there you should also clean the mode switch.
--
Best Regards,
Daniel Sofie
Electronics Supply & Repair
-------------------------


"Gary Noland" <GaryNoland99@yahoo.com> wrote in message
news:5e8c9d80.0401070554.22d0e705@posting.google.com...

Hi,
I'm having some problems with my Sony VCR. It's model # SLV-750HF
(one of the best VCRs Sony has ever manufactured). The problem is
that the "high speed rewind" does not work. The regular rewind,
however seems to work for a few seconds but then the unit completely
stops. Here are two sets of error codes that I receive: LH 16M 02S
and LH 07M 02S (please note that the H signifies hours, M is minutes,
and S is seconds. I would greatly appreciate any help.
Thanks in advance,

Gary Noland
GaryNoland99@yahoo.com