Please help me to find a proper wideband transformer

H

Hanqing Xing

Guest
Hi. I need some transformers to do some testing. The specifications are as
follows:

it is a signal coupling transformer (not a power transformer). The turns
ratio is 1:2, or equivalently, the impedence ratio is 1:4; the lowest
frequency is about 100Hz or 1kHz; the highest frequency is about 10MHz; the
inserton loss should be small; the transformer is used to couple a single
ended signal to a differential signal; the input voltage to the transformer
is small, usually less than 5 volt

Does anyone know where I can find this kind of transformers?

Thanks in advance.
 
Check Mini-Circuits -- www.mini-circuits.com.

----------------------------------------
Tim Wescott
Wescott Design Services
http://www.wescottdesign.com


"Hanqing Xing" <xinghq@iastate.edu> wrote in message
news:bukfq1$6b5$1@news.iastate.edu...
Hi. I need some transformers to do some testing. The specifications are as
follows:

it is a signal coupling transformer (not a power transformer). The turns
ratio is 1:2, or equivalently, the impedence ratio is 1:4; the lowest
frequency is about 100Hz or 1kHz; the highest frequency is about 10MHz;
the
inserton loss should be small; the transformer is used to couple a single
ended signal to a differential signal; the input voltage to the
transformer
is small, usually less than 5 volt

Does anyone know where I can find this kind of transformers?

Thanks in advance.
 

Welcome to EDABoard.com

Sponsor

Back
Top