pks help in adding power stripes

[eda_cadence]

hi friends
i set floorplan for my design as follow
cluster (chip )size
Top - bottom (0 -58)
left - right (0-57)
i/o - core
spacing for all t,b,l,r is 4

how i set power stripes for metal layer in Umc18 lef library
for met6 spacing is 0.60 and width is 0.44(i read from lef library).
please help what data i have to set in
stripe width =?
number of stripes =?
net names =?
start from distance =?
stop from distance =?
stripe spacing =?
net spacing =?

and i also wanna know in what way i can set the number of power
stripes.
thanks
regards
aravind

 

[eda_cadence]

thanks mk,
but i didnt get your point, 1u/mA means, ur telling about width of
power stripes or number of power stripes, pls tell with an example then
only i can understand. i m not so brillant to understand immediately.

is it any way/command to find number of nand equalivence in my design.
pls explain with an examples
thanks