Pioneer XV-HTD520 dvd/receiver

J

Jerry Chanderpaul

Guest
Hi has anyone ran into a bad transformer on this unit, I get a stanby light
on when unit is plugged in with no display when i try to turn on the power,
relay clicks, stanby light goes out for a few seconds then comes back
on,still no display. After taking the unit apart I found the Main
transformer is not putting out an AC voltage into the bridge IC rectifiers,
I put 120vac directly into the transformer and nothing out , the primary
windings measures about 2 kilo ohms, Where can i get this transformer (Bando
xts3061-a) for a good price, other #s on the transformer is bem1-whu
........ whxc10590........bd21a65c-001b 130(b)

Thanks
Jerry
 
Check Pioneer for their price - 800-457-2881.


Mark Z.




"Jerry Chanderpaul" <jerrych@rogers.com> wrote in message
news:rbGib.325271$Lnr1.115547@news01.bloor.is.net.cable.rogers.com...
Hi has anyone ran into a bad transformer on this unit, I get a stanby
light
on when unit is plugged in with no display when i try to turn on the
power,
relay clicks, stanby light goes out for a few seconds then comes back
on,still no display. After taking the unit apart I found the Main
transformer is not putting out an AC voltage into the bridge IC
rectifiers,
I put 120vac directly into the transformer and nothing out , the primary
windings measures about 2 kilo ohms, Where can i get this transformer
(Bando
xts3061-a) for a good price, other #s on the transformer is bem1-whu
....... whxc10590........bd21a65c-001b 130(b)

Thanks
Jerry
Click to expand...
 
$84 at Argo electronics, 2 weeks delievry, guess its coming from Japan,
since this is a farily new unit I wonder if this is gonna be a common
problem with these units

Jerry
"Mark D. Zacharias" <mzacharias@nospam.earthlink.net> wrote in message
news:3HHib.64$7a4.43@newsread4.news.pas.earthlink.net...
Check Pioneer for their price - 800-457-2881.


Mark Z.




"Jerry Chanderpaul" <jerrych@rogers.com> wrote in message
news:rbGib.325271$Lnr1.115547@news01.bloor.is.net.cable.rogers.com...
Hi has anyone ran into a bad transformer on this unit, I get a stanby
light
on when unit is plugged in with no display when i try to turn on the
power,
relay clicks, stanby light goes out for a few seconds then comes back
on,still no display. After taking the unit apart I found the Main
transformer is not putting out an AC voltage into the bridge IC
rectifiers,
I put 120vac directly into the transformer and nothing out , the primary
windings measures about 2 kilo ohms, Where can i get this transformer
(Bando
xts3061-a) for a good price, other #s on the transformer is bem1-whu
....... whxc10590........bd21a65c-001b 130(b)

Thanks
Jerry
Click to expand...
 
Why would you want to pay $84 for a $46 transformer that can be ordered from
http://parts.pioneerelectronics.com/ and is in stock?


Good Luck,
Bill Jr

BTW, XTS3061 is the Pioneer part number.



"Jerry Chanderpaul" <jerrych@rogers.com> wrote in message
news:5I_ib.335389$Lnr1.122837@news01.bloor.is.net.cable.rogers.com...
$84 at Argo electronics, 2 weeks delievry, guess its coming from Japan,
since this is a farily new unit I wonder if this is gonna be a common
problem with these units

Jerry
"Mark D. Zacharias" <mzacharias@nospam.earthlink.net> wrote in message
news:3HHib.64$7a4.43@newsread4.news.pas.earthlink.net...
Check Pioneer for their price - 800-457-2881.


Mark Z.




"Jerry Chanderpaul" <jerrych@rogers.com> wrote in message
news:rbGib.325271$Lnr1.115547@news01.bloor.is.net.cable.rogers.com...
Hi has anyone ran into a bad transformer on this unit, I get a stanby
light
on when unit is plugged in with no display when i try to turn on the
power,
relay clicks, stanby light goes out for a few seconds then comes back
on,still no display. After taking the unit apart I found the Main
transformer is not putting out an AC voltage into the bridge IC
rectifiers,
I put 120vac directly into the transformer and nothing out , the
primary
windings measures about 2 kilo ohms, Where can i get this transformer
(Bando
xts3061-a) for a good price, other #s on the transformer is bem1-whu
....... whxc10590........bd21a65c-001b 130(b)

Thanks
Jerry
Click to expand...
 
Thanks Bill, I will check the website, I am located in Toronto, Canada so i
would assume your price is $46 US which is about $68 CAN and then there
will probably be shipping cost which will work out to be the same thing i am
paying in Canada $84

Jerry
"Bill Jr" <bill@nospam.usa2net.net> wrote in message
news:0U5jb.111767$eS5.35823@twister.tampabay.rr.com...
Why would you want to pay $84 for a $46 transformer that can be ordered
from
http://parts.pioneerelectronics.com/ and is in stock?


Good Luck,
Bill Jr

BTW, XTS3061 is the Pioneer part number.



"Jerry Chanderpaul" <jerrych@rogers.com> wrote in message
news:5I_ib.335389$Lnr1.122837@news01.bloor.is.net.cable.rogers.com...
$84 at Argo electronics, 2 weeks delievry, guess its coming from Japan,
since this is a farily new unit I wonder if this is gonna be a common
problem with these units

Jerry
"Mark D. Zacharias" <mzacharias@nospam.earthlink.net> wrote in message
news:3HHib.64$7a4.43@newsread4.news.pas.earthlink.net...
Check Pioneer for their price - 800-457-2881.


Mark Z.




"Jerry Chanderpaul" <jerrych@rogers.com> wrote in message
news:rbGib.325271$Lnr1.115547@news01.bloor.is.net.cable.rogers.com...
Hi has anyone ran into a bad transformer on this unit, I get a
stanby
light
on when unit is plugged in with no display when i try to turn on
the
power,
relay clicks, stanby light goes out for a few seconds then comes
back
on,still no display. After taking the unit apart I found the Main
transformer is not putting out an AC voltage into the bridge IC
rectifiers,
I put 120vac directly into the transformer and nothing out , the
primary
windings measures about 2 kilo ohms, Where can i get this
transformer
(Bando
xts3061-a) for a good price, other #s on the transformer is
bem1-whu
....... whxc10590........bd21a65c-001b 130(b)

Thanks
Jerry
Click to expand...
 
Jerry,
That info does help.
I should refrain from assuming US dollars for everything posted on usenet.

Good Luck,
Bill Jr


"Jerry" <jerrychanderpaul@aol.com> wrote in message
news:fKdjb.3369$Z_2.289688@news20.bellglobal.com...
Thanks Bill, I will check the website, I am located in Toronto, Canada so
i
would assume your price is $46 US which is about $68 CAN and then there
will probably be shipping cost which will work out to be the same thing i
am
paying in Canada $84

Jerry
"Bill Jr" <bill@nospam.usa2net.net> wrote in message
news:0U5jb.111767$eS5.35823@twister.tampabay.rr.com...
Why would you want to pay $84 for a $46 transformer that can be ordered
from
http://parts.pioneerelectronics.com/ and is in stock?


Good Luck,
Bill Jr

BTW, XTS3061 is the Pioneer part number.



"Jerry Chanderpaul" <jerrych@rogers.com> wrote in message
news:5I_ib.335389$Lnr1.122837@news01.bloor.is.net.cable.rogers.com...
$84 at Argo electronics, 2 weeks delievry, guess its coming from
Japan,
since this is a farily new unit I wonder if this is gonna be a common
problem with these units

Jerry
"Mark D. Zacharias" <mzacharias@nospam.earthlink.net> wrote in message
news:3HHib.64$7a4.43@newsread4.news.pas.earthlink.net...
Check Pioneer for their price - 800-457-2881.


Mark Z.




"Jerry Chanderpaul" <jerrych@rogers.com> wrote in message

news:rbGib.325271$Lnr1.115547@news01.bloor.is.net.cable.rogers.com...
Hi has anyone ran into a bad transformer on this unit, I get a
stanby
light
on when unit is plugged in with no display when i try to turn on
the
power,
relay clicks, stanby light goes out for a few seconds then comes
back
on,still no display. After taking the unit apart I found the Main
transformer is not putting out an AC voltage into the bridge IC
rectifiers,
I put 120vac directly into the transformer and nothing out , the
primary
windings measures about 2 kilo ohms, Where can i get this
transformer
(Bando
xts3061-a) for a good price, other #s on the transformer is
bem1-whu
....... whxc10590........bd21a65c-001b 130(b)

Thanks
Jerry
Click to expand...
 
try to jump the left (looking at unit from front) to middle contacts
on transformer( a few strands of solder-wick should do it).
 
I tried the jumper, it didnt work, I guess this proves the transformer is
shot. Thanks anyways for your suggestions

Jerry
"randy" <searsdvdtech@yahoo.com> wrote in message
news:506a5f6b.0310271241.35d95a64@posting.google.com...
try to jump the left (looking at unit from front) to middle contacts
on transformer( a few strands of solder-wick should do it).
Click to expand...
 
Changed transformer ,Unit working fine now. Thanks for everyone help


"Jerry Chanderpaul" <jerrych@rogers.com> wrote in message
news:rbGib.325271$Lnr1.115547@news01.bloor.is.net.cable.rogers.com...
Hi has anyone ran into a bad transformer on this unit, I get a stanby
light
on when unit is plugged in with no display when i try to turn on the
power,
relay clicks, stanby light goes out for a few seconds then comes back
on,still no display. After taking the unit apart I found the Main
transformer is not putting out an AC voltage into the bridge IC
rectifiers,
I put 120vac directly into the transformer and nothing out , the primary
windings measures about 2 kilo ohms, Where can i get this transformer
(Bando
xts3061-a) for a good price, other #s on the transformer is bem1-whu
....... whxc10590........bd21a65c-001b 130(b)

Thanks
Jerry
Click to expand...
 
www.hrdiemen.es is a good place to attend. They#re in spain, but deliver
worldwide.

Jerry Chanderpaul wrote:

Changed transformer ,Unit working fine now. Thanks for everyone help


"Jerry Chanderpaul" <jerrych@rogers.com> wrote in message
news:rbGib.325271$Lnr1.115547@news01.bloor.is.net.cable.rogers.com...
Hi has anyone ran into a bad transformer on this unit, I get a stanby
light
on when unit is plugged in with no display when i try to turn on the
power,
relay clicks, stanby light goes out for a few seconds then comes back
on,still no display. After taking the unit apart I found the Main
transformer is not putting out an AC voltage into the bridge IC
rectifiers,
I put 120vac directly into the transformer and nothing out , the primary
windings measures about 2 kilo ohms, Where can i get this transformer
(Bando
xts3061-a) for a good price, other #s on the transformer is bem1-whu
....... whxc10590........bd21a65c-001b 130(b)

Thanks
Jerry
Click to expand...
--
Sincerely
Aries Quitex
http://aries.eu.cx http://wanted.freesubs.de
Advanced Architecture - OS3.9 & GeForceIV =)
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top