pinouts for summasketch III digitizer

N

none

Guest
I recent picked up 4 summasketch III digitizers without interface or
power cables. I pretty sure I can get a power supply. What I need is
the pinout of the RJ-45 connector on the back of the digitizer and how
the power supply and serial/data/interface cable connects to that. Any
help the can be provided is greatly appreciated.

Thank you
 
My contact for my summasketch III is:

Sonel Popel 800-344-4723, ext.208
SPopel@gtcocalcomp.com

price the items (contact above) they may be cheep enough to not go though
the trouble of making something. If it is to much buy just one then copy
that.
The contact info is about a month old so it should be still good.
You can also go to the CalComp web site they may have some info there.

bill



"none" <jderickt@yahoo.com> wrote in message
news:vfq4kvo2hir7vlru0838j79aah2hub4s7j@4ax.com...
I recent picked up 4 summasketch III digitizers without interface or
power cables. I pretty sure I can get a power supply. What I need is
the pinout of the RJ-45 connector on the back of the digitizer and how
the power supply and serial/data/interface cable connects to that. Any
help the can be provided is greatly appreciated.

Thank you
Click to expand...
 
Thanks for the info. Right now unfortunately I am unemployed and
trying to get this running for some work I'm tryig to get out. I'll
keep searching. I have enough parts lying around that I coule build a
couple so may I could sell a couple of the others. If you find out
anything else please let me know.

Derick

On Tue, 19 Aug 2003 22:48:32 -0400, "William Lenz" <billlenz@erie.net>
wrote:

My contact for my summasketch III is:

Sonel Popel 800-344-4723, ext.208
SPopel@gtcocalcomp.com

price the items (contact above) they may be cheep enough to not go though
the trouble of making something. If it is to much buy just one then copy
that.
The contact info is about a month old so it should be still good.
You can also go to the CalComp web site they may have some info there.

bill



"none" <jderickt@yahoo.com> wrote in message
news:vfq4kvo2hir7vlru0838j79aah2hub4s7j@4ax.com...
I recent picked up 4 summasketch III digitizers without interface or
power cables. I pretty sure I can get a power supply. What I need is
the pinout of the RJ-45 connector on the back of the digitizer and how
the power supply and serial/data/interface cable connects to that. Any
help the can be provided is greatly appreciated.

Thank you
Click to expand...
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top