pic18f4620 programming with a jdm programmer?

T

timmmmayyy!

Guest
Is there any software out there, ideally freeware, that will program a
pic18f4620?
I am using icsp (In circuit programming), So i cannot use the low voltage
method of programming.

Thanks
 
timmmmayyy! wrote:
Is there any software out there, ideally freeware, that will program a
pic18f4620?
I am using icsp (In circuit programming), So i cannot use the low voltage
method of programming.

Thanks
Click to expand...
The PICALL can do the 18F458 in ICSP, how much different is the 18F4620? (A
little hung over today, sorry...) The .ini file is customizable for other chips,
as long as the programming method/protocol is the same as the 18F458 it should
work. See http://picallw.com
 
"Mark Jones" <abuse@127.0.0.1> wrote in message
news:gaadnYH69qvctKbfRVn-uA@buckeye-express.com...
timmmmayyy! wrote:
Is there any software out there, ideally freeware, that will program a
pic18f4620?
I am using icsp (In circuit programming), So i cannot use the low
voltage
method of programming.

Thanks



The PICALL can do the 18F458 in ICSP, how much different is the 18F4620?
(A
little hung over today, sorry...) The .ini file is customizable for other
chips,
as long as the programming method/protocol is the same as the 18F458 it
should
work. See http://picallw.com
Click to expand...
I don`t know how much different from the 18f458, however with icprog v1.05d
i used all the 18f supported devices but with no luck at all.
I manged to find one piece of software that programed the program memory ok,
using the jdm programmer, but the config data was completely wrong!
 
Mark Jones wrote:
timmmmayyy! wrote:

Is there any software out there, ideally freeware, that will program a
pic18f4620?
I am using icsp (In circuit programming), So i cannot use the low voltage
method of programming.

Thanks




The PICALL can do the 18F458 in ICSP, how much different is the 18F4620? (A
little hung over today, sorry...) The .ini file is customizable for other chips,
as long as the programming method/protocol is the same as the 18F458 it should
work. See http://picallw.com
Click to expand...
Can this thing to dsPIC?

--
Regards,
Robert Monsen

"Your Highness, I have no need of this hypothesis."
- Pierre Laplace (1749-1827), to Napoleon,
on why his works on celestial mechanics make no mention of God.
 
"Anthony Fremont" <spam@anywhere.com> wrote in message
news:lqH_d.23940$8D.6694@tornado.texas.rr.com...
"Robert Monsen" <rcsurname@comcast.net> wrote

Mark Jones wrote:

The PICALL can do the 18F458 in ICSP, how much different is the
18F4620? (A
little hung over today, sorry...) The .ini file is customizable for
other chips,
as long as the programming method/protocol is the same as the 18F458
it should
work. See http://picallw.com

Can this thing to dsPIC?

AFAIK, no it can't. I have a picall programmer that I really like. It
works very well for me, but I think the creator has plans on not
supporting it any more. He recently made the software available for
free. It was already free if you had a picall programmer, but the
p16pro originally required payment for the software. I had to manually
hack at mine to get it to program 16F88 chips, but it does work now. I
really like mine, but it's future doesn't look all that great as newer
Pics come out. Plus it uses a parallel port.
Click to expand...
heres the awnswer:
Found it after a lot of searching:
http://www.members.aon.at/electronics/pic/picpgm/index.html
 
"Robert Monsen" <rcsurname@comcast.net> wrote

Mark Jones wrote:

The PICALL can do the 18F458 in ICSP, how much different is the
18F4620? (A
little hung over today, sorry...) The .ini file is customizable for
other chips,
as long as the programming method/protocol is the same as the 18F458
it should
work. See http://picallw.com

Can this thing to dsPIC?
Click to expand...
AFAIK, no it can't. I have a picall programmer that I really like. It
works very well for me, but I think the creator has plans on not
supporting it any more. He recently made the software available for
free. It was already free if you had a picall programmer, but the
p16pro originally required payment for the software. I had to manually
hack at mine to get it to program 16F88 chips, but it does work now. I
really like mine, but it's future doesn't look all that great as newer
Pics come out. Plus it uses a parallel port.
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top