Photo Circuits

H

Henry

Guest
Thanks everyone for all the answers to my previous questions. My photo
circuit is mostly done. Done in the fact that it works. It could probably
use much improvement, but it works. I built it on a bread board and mounted
it in a hard plastic VHS tape case. (Had to use a razor blade to cut off the
inside ring for the video tape.) Those actually make reasonably nice project
cases, and the transluscent ones even allow one to easily see indicator LEDs
without having to drill holes for them. But I worry that they kind of
plastic that the transluscent ones are made from may be static prone. Anyone
know?

I have rediscovered how useful those 555 timers are.

Anyway, thanks again.
Henry
 
On 2006-01-10, Henry <henrytj@pghmail.com> wrote:
Thanks everyone for all the answers to my previous questions. My photo
circuit is mostly done. Done in the fact that it works. It could probably
use much improvement, but it works. I built it on a bread board and mounted
it in a hard plastic VHS tape case. (Had to use a razor blade to cut off the
inside ring for the video tape.) Those actually make reasonably nice project
cases, and the transluscent ones even allow one to easily see indicator LEDs
without having to drill holes for them. But I worry that they kind of
plastic that the transluscent ones are made from may be static prone. Anyone
know?
probably they are. you could line them with antistatic plastc (ask at any
place that assembles computers they'll have heaps.)

Bye.
Jasen
 
On Wed, 11 Jan 2006 19:50:14 -0500, Henry wrote:
"Jasen Betts" <jasen@free.net.nospam.nz> wrote in message
....
probably they are. you could line them with antistatic plastc (ask at
any place that assembles computers they'll have heaps.)

Bye.
Jasen

Atually I previously asked at 3 different places (like CompUSA, etc.)
for anti-static foam or plastic and was told that they have none. Some
said they throw it away immediately, some said that it goes with the
customer.

Henry
Go to the ones that say they throw it away, and ask, "When does it
go into the dumpster? Can I wait outside for some? Thanks!"

Good Luck!
Rich
 

Welcome to EDABoard.com

Sponsor

Back
Top