Phillips Car Stereo Security code

T

tedius

Guest
Hi
I've been asked by a friend to find out how to enter the security code
on this car stereo.
We have the code ,but not the doc's how to enter it.

anybody familliar with how to enter this code?

thank's

Mathew
 
"tedius" <m_tiede~del~@iprimus.com.au> wrote in message
news:4193cd5a_1@news.iprimus.com.au...
Hi
I've been asked by a friend to find out how to enter the security code
on this car stereo.
We have the code ,but not the doc's how to enter it.

anybody familliar with how to enter this code?

thank's

Mathew
Click to expand...

A model number would be helpful.
 
"tedius" <m_tiede~del~@iprimus.com.au> wrote in message
news:4193cd5a_1@news.iprimus.com.au...
Hi
I've been asked by a friend to find out how to enter the security code
on this car stereo.
We have the code ,but not the doc's how to enter it.

anybody familliar with how to enter this code?

thank's

Mathew


The one I had was a real pain,
Click to expand...
You turned it on, and it would work, wait for about 2 or 3 minutes, it would
then display the word CODE on the display,
You then typed in the 1st number on the preset buttons, and push Mem, repeat
it until all the numbers entered, and then it should work
But I don't know if that worked on all Philips units.
Allan
 
"Allan" <allanaws@hotmail.com> wrote in message
news:419529ce$0$47945$c30e37c6@ken-reader.news.telstra.net...
"tedius" <m_tiede~del~@iprimus.com.au> wrote in message
news:4193cd5a_1@news.iprimus.com.au...
Hi
I've been asked by a friend to find out how to enter the security code
on this car stereo.
We have the code ,but not the doc's how to enter it.

anybody familliar with how to enter this code?

thank's

Mathew


The one I had was a real pain,
You turned it on, and it would work, wait for about 2 or 3 minutes, it
would
then display the word CODE on the display,
You then typed in the 1st number on the preset buttons, and push Mem,
repeat
it until all the numbers entered, and then it should work
But I don't know if that worked on all Philips units.
Allan


Try pressing and holding the '1' and '3' buttons when turning on, then enter
Click to expand...
the code. IIRC that's the method for the Philips (I'll see if I can find my
own doc's).

Ken
 
"Ken Taylor" <ken@home.nz> wrote in message
news:27cld.1023$9A.51755@news.xtra.co.nz...
"Allan" <allanaws@hotmail.com> wrote in message
news:419529ce$0$47945$c30e37c6@ken-reader.news.telstra.net...

"tedius" <m_tiede~del~@iprimus.com.au> wrote in message
news:4193cd5a_1@news.iprimus.com.au...
Hi
I've been asked by a friend to find out how to enter the security code
on this car stereo.
We have the code ,but not the doc's how to enter it.

anybody familliar with how to enter this code?

thank's

Mathew


The one I had was a real pain,
You turned it on, and it would work, wait for about 2 or 3 minutes, it
would
then display the word CODE on the display,
You then typed in the 1st number on the preset buttons, and push Mem,
repeat
it until all the numbers entered, and then it should work
But I don't know if that worked on all Philips units.
Allan


Try pressing and holding the '1' and '3' buttons when turning on, then
enter
the code. IIRC that's the method for the Philips (I'll see if I can find
my
own doc's).

Ken
Click to expand...
Thank's to all that contributid, have solved the problem
with patience and a few stubbies........was quite nice.


Mathew
 
"tedius" <m_tiede~del~@iprimus.com.au> wrote in message
news:41966fb6_1@news.iprimus.com.au...
"Ken Taylor" <ken@home.nz> wrote in message
news:27cld.1023$9A.51755@news.xtra.co.nz...
"Allan" <allanaws@hotmail.com> wrote in message
news:419529ce$0$47945$c30e37c6@ken-reader.news.telstra.net...

"tedius" <m_tiede~del~@iprimus.com.au> wrote in message
news:4193cd5a_1@news.iprimus.com.au...
Hi
I've been asked by a friend to find out how to enter the security
code
on this car stereo.
We have the code ,but not the doc's how to enter it.

anybody familliar with how to enter this code?

thank's

Mathew


The one I had was a real pain,
You turned it on, and it would work, wait for about 2 or 3 minutes, it
would
then display the word CODE on the display,
You then typed in the 1st number on the preset buttons, and push Mem,
repeat
it until all the numbers entered, and then it should work
But I don't know if that worked on all Philips units.
Allan


Try pressing and holding the '1' and '3' buttons when turning on, then
enter
the code. IIRC that's the method for the Philips (I'll see if I can find
my
own doc's).

Ken



Thank's to all that contributid, have solved the problem
with patience and a few stubbies........was quite nice.


Mathew


Enough stubbies make any problem go away. Or at least the worry..... :)
Click to expand...

Ken
 
"Ken Taylor" <ken@home.nz> wrote in message
news:U_vld.1370$9A.62246@news.xtra.co.nz...
"tedius" <m_tiede~del~@iprimus.com.au> wrote in message
news:41966fb6_1@news.iprimus.com.au...

"Ken Taylor" <ken@home.nz> wrote in message
news:27cld.1023$9A.51755@news.xtra.co.nz...
"Allan" <allanaws@hotmail.com> wrote in message
news:419529ce$0$47945$c30e37c6@ken-reader.news.telstra.net...

"tedius" <m_tiede~del~@iprimus.com.au> wrote in message
news:4193cd5a_1@news.iprimus.com.au...
Hi
I've been asked by a friend to find out how to enter the security
code
on this car stereo.
We have the code ,but not the doc's how to enter it.

anybody familliar with how to enter this code?

thank's

Mathew


The one I had was a real pain,
You turned it on, and it would work, wait for about 2 or 3 minutes,
it
would
then display the word CODE on the display,
You then typed in the 1st number on the preset buttons, and push Mem,
repeat
it until all the numbers entered, and then it should work
But I don't know if that worked on all Philips units.
Allan


Try pressing and holding the '1' and '3' buttons when turning on, then
enter
the code. IIRC that's the method for the Philips (I'll see if I can
find
my
own doc's).

Ken



Thank's to all that contributid, have solved the problem
with patience and a few stubbies........was quite nice.


Mathew


Enough stubbies make any problem go away. Or at least the worry..... :)

Ken
So do tell, what was the answer...
Click to expand...

:>
 
"Allan" <allanaws@hotmail.com> wrote in message
news:41972f47$0$47942$c30e37c6@ken-reader.news.telstra.net...
"Ken Taylor" <ken@home.nz> wrote in message
news:U_vld.1370$9A.62246@news.xtra.co.nz...
"tedius" <m_tiede~del~@iprimus.com.au> wrote in message
news:41966fb6_1@news.iprimus.com.au...

"Ken Taylor" <ken@home.nz> wrote in message
news:27cld.1023$9A.51755@news.xtra.co.nz...
"Allan" <allanaws@hotmail.com> wrote in message
news:419529ce$0$47945$c30e37c6@ken-reader.news.telstra.net...

"tedius" <m_tiede~del~@iprimus.com.au> wrote in message
news:4193cd5a_1@news.iprimus.com.au...
Hi
I've been asked by a friend to find out how to enter the security
code
on this car stereo.
We have the code ,but not the doc's how to enter it.

anybody familliar with how to enter this code?

thank's

Mathew


The one I had was a real pain,
You turned it on, and it would work, wait for about 2 or 3 minutes,
it
would
then display the word CODE on the display,
You then typed in the 1st number on the preset buttons, and push
Mem,
repeat
it until all the numbers entered, and then it should work
But I don't know if that worked on all Philips units.
Allan


Try pressing and holding the '1' and '3' buttons when turning on,
then
enter
the code. IIRC that's the method for the Philips (I'll see if I can
find
my
own doc's).

Ken



Thank's to all that contributid, have solved the problem
with patience and a few stubbies........was quite nice.


Mathew


Enough stubbies make any problem go away. Or at least the worry.....
:)

Ken
So do tell, what was the answer...

:


O.K.........
Click to expand...


First I had a look on Philips website how the keypad was connected to uC.
5 buttons, button 5 in the LSB position.
When unit was ready to enter it was just a matter to enter the 1st digit
using
up /down and then find digit advance.Button 5 was advance digit
position/set.
took 4 try's.

There you have it.
Mathew
 
On Fri, 12 Nov 2004 06:36:39 +1000, "tedius"
<m_tiede~del~@iprimus.com.au> put finger to keyboard and composed:

I've been asked by a friend to find out how to enter the security code
on this car stereo.
Click to expand...
These are the instructions for the car radio/cassette player in a 1993
Ford.

Select the accessories position.
Turn radio on and wait approx 3 mins for "code" in display.
Press 5 to begin code entry.
Use UP and DOWN buttons to select first code digit.
Press 5 to store digit.
Repeat for remaining digits.


- Franc Zabkar
--
Please remove one 's' from my address when replying by email.
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top