Philips FL1.10

  • Thread starter Dave Plowman (News)
  • Start date
D

Dave Plowman (News)

Guest
This Philips TV model FL1.10 goes to standby when switched on - after a
brief flash from the LED displays. I'm guessing the SMPS is shutting down
due to a fault elsewhere. Any likely cause?

--
*I don't have a license to kill, but I do have a learner's permit.

Dave Plowman dave@davenoise.co.uk London SW
To e-mail, change noise into sound.
 
Dave Plowman (News) wrote:
This Philips TV model FL1.10 goes to standby when switched on - after a
brief flash from the LED displays. I'm guessing the SMPS is shutting down
due to a fault elsewhere. Any likely cause?
Click to expand...
An Accountant.

--
Adrian C
 
"Dave Plowman (News)" <dave@davenoise.co.uk> wrote in message
news:50cb27ab62dave@davenoise.co.uk...
This Philips TV model FL1.10 goes to standby when switched on - after a
brief flash from the LED displays. I'm guessing the SMPS is shutting down
due to a fault elsewhere. Any likely cause?

--
*I don't have a license to kill, but I do have a learner's permit.

Dave Plowman dave@davenoise.co.uk London SW
To e-mail, change noise into sound.
Click to expand...
Have you checked the secondary side rectifiers?

Not uncommon on Philips gear!
 
In article <TgDWm.68295$Bd7.1443@newsfe07.ams2>,
ian field <gangprobing.alien@ntlworld.com> wrote:

"Dave Plowman (News)" <dave@davenoise.co.uk> wrote in message
news:50cb27ab62dave@davenoise.co.uk...
This Philips TV model FL1.10 goes to standby when switched on - after
a brief flash from the LED displays. I'm guessing the SMPS is shutting
down due to a fault elsewhere. Any likely cause?
Click to expand...

Have you checked the secondary side rectifiers?

Not uncommon on Philips gear!
Click to expand...
Will do. Was hoping there might be someone familiar with these and knew
the common faults.

--
*Pride is what we have. Vanity is what others have.

Dave Plowman dave@davenoise.co.uk London SW
To e-mail, change noise into sound.
 
Dave Plowman (News) wrote:
Will do. Was hoping there might be someone familiar with these and knew
the common faults.
Click to expand...
Google immediately finds this (which might not be a help)...

<http://www.hamradio-badarc.co.uk/television/tvp/philipsfl1pt4.htm>

Also look at

<http://www.eserviceinfo.com/repair_tips.php?search_rt=FL1.10>


--
Adrian C
 
"Dave Plowman (News)" <dave@davenoise.co.uk> wrote in message
news:50cb82e371dave@davenoise.co.uk...
In article <TgDWm.68295$Bd7.1443@newsfe07.ams2>,
ian field <gangprobing.alien@ntlworld.com> wrote:

"Dave Plowman (News)" <dave@davenoise.co.uk> wrote in message
news:50cb27ab62dave@davenoise.co.uk...
This Philips TV model FL1.10 goes to standby when switched on - after
a brief flash from the LED displays. I'm guessing the SMPS is shutting
down due to a fault elsewhere. Any likely cause?


Have you checked the secondary side rectifiers?

Not uncommon on Philips gear!

Will do. Was hoping there might be someone familiar with these and knew
the common faults.
Click to expand...
The last Philips item I fixed was a DVD player, the secondary side rectifier
that failed was a 3A leaded part, but holes and screen print were present
for an alternative 2-pin TO220 rectifier - I had to guess the best course of
action.

I opted for a 3A rectifier with faster Trr than the original rather than a
higher current replacement - it didn't bounce.
 
In article <7p15fvFr8U1@mid.individual.net>,
Adrian C <email@here.invalid> wrote:
Dave Plowman (News) wrote:

Will do. Was hoping there might be someone familiar with these and knew
the common faults.


Google immediately finds this (which might not be a help)...

http://www.hamradio-badarc.co.uk/television/tvp/philipsfl1pt4.htm

Also look at

http://www.eserviceinfo.com/repair_tips.php?search_rt=FL1.10
Click to expand...
Thanks - didn't find one of those on my search.
Starting from the info on the second one, found the LOP transistor fooked
- a BU 508 - and replaced it. It then came out of standby to the
accompaniment of sounds of arcing, smoke and smells. But not sure exactly
where from as I powered down immediately. But guess it needs expensive
replacements so probably scrap. Sad as it's the Matchline version in a
decent looking box.

--
*I got a sweater for Christmas. I really wanted a screamer or a moaner*

Dave Plowman dave@davenoise.co.uk London SW
To e-mail, change noise into sound.
 
"Dave Plowman (News)" <dave@davenoise.co.uk> wrote in message
news:50cc0d254edave@davenoise.co.uk...
In article <7p15fvFr8U1@mid.individual.net>,
Adrian C <email@here.invalid> wrote:
Dave Plowman (News) wrote:

Will do. Was hoping there might be someone familiar with these and knew
the common faults.


Google immediately finds this (which might not be a help)...

http://www.hamradio-badarc.co.uk/television/tvp/philipsfl1pt4.htm

Also look at

http://www.eserviceinfo.com/repair_tips.php?search_rt=FL1.10

Thanks - didn't find one of those on my search.
Starting from the info on the second one, found the LOP transistor fooked
- a BU 508 - and replaced it. It then came out of standby to the
accompaniment of sounds of arcing, smoke and smells. But not sure exactly
where from as I powered down immediately. But guess it needs expensive
replacements so probably scrap. Sad as it's the Matchline version in a
decent looking box.
Click to expand...
Check whether it has a disc ceramic flyback tuning cap, they often crack and
usually fail S/C - but could be in the early stage of breaking down.
 
In article <50cc0d254edave@davenoise.co.uk>,
Dave Plowman (News) <dave@davenoise.co.uk> wrote:
Starting from the info on the second one, found the LOP transistor
fooked - a BU 508 - and replaced it. It then came out of standby to the
accompaniment of sounds of arcing, smoke and smells. But not sure
exactly where from as I powered down immediately. But guess it needs
expensive replacements so probably scrap. Sad as it's the Matchline
version in a decent looking box.
Click to expand...
Just to follow up, found the plug/socket at the tube end for the scan
coils burnt out internally. Another tip from that site. Did a bodge repair
on that PCB and soldered the ribbons in direct - and it's working fine.
(I'd guess a 'proper' repair would mean a new tube. ;-))

--
*What was the best thing before sliced bread?

Dave Plowman dave@davenoise.co.uk London SW
To e-mail, change noise into sound.
 
Dave Plowman (News) wrote:

*What was the best thing before sliced bread?
Click to expand...
Sliced meat, otherwise no chance of making a sandwich ...

--
Adrian C
 
*What was the best thing before sliced bread?
Click to expand...
A bread slicer.

- Franc Zabkar
--
Please remove one 'i' from my address when replying by email.
 
On Thu, 17 Dec 2009 16:53:03 +0000 (GMT), "Dave Plowman (News)"
<dave@davenoise.co.uk> put finger to keyboard and composed:

This Philips TV model FL1.10 goes to standby when switched on - after a
brief flash from the LED displays. I'm guessing the SMPS is shutting down
due to a fault elsewhere. Any likely cause?
Click to expand...
Here are the circuit diagrams:

http://rapidshare.com/files/241843238/PHILLIPS_CHASIS_FL_1.10.rar

http://rs738gc.rapidshare.com/files/241843238/7354033/PHILLIPS_CHASIS_FL_1.10.rar

- Franc Zabkar
--
Please remove one 'i' from my address when replying by email.
 
"Franc Zabkar" <fzabkar@iinternode.on.net> wrote in message
news:cs7jj5p61f8kcf4lr8436qts49o2chlhkb@4ax.com...
On Thu, 17 Dec 2009 16:53:03 +0000 (GMT), "Dave Plowman (News)"
dave@davenoise.co.uk> put finger to keyboard and composed:

This Philips TV model FL1.10 goes to standby when switched on - after a
brief flash from the LED displays. I'm guessing the SMPS is shutting down
due to a fault elsewhere. Any likely cause?

Here are the circuit diagrams:

http://rapidshare.com/files/241843238/PHILLIPS_CHASIS_FL_1.10.rar

http://rs738gc.rapidshare.com/files/241843238/7354033/PHILLIPS_CHASIS_FL_1.10.rar

- Franc Zabkar
Click to expand...
Is the file available anywhere else?

Clicking the link seems to alternate between high number of people
downloading - try again in 2 minutes, or "you have to be a premium user to
download this file".
 
On Tue, 29 Dec 2009 17:46:51 -0000, "ian field"
<gangprobing.alien@ntlworld.com> put finger to keyboard and composed:

"Franc Zabkar" <fzabkar@iinternode.on.net> wrote in message
news:cs7jj5p61f8kcf4lr8436qts49o2chlhkb@4ax.com...
On Thu, 17 Dec 2009 16:53:03 +0000 (GMT), "Dave Plowman (News)"
dave@davenoise.co.uk> put finger to keyboard and composed:

This Philips TV model FL1.10 goes to standby when switched on - after a
brief flash from the LED displays. I'm guessing the SMPS is shutting down
due to a fault elsewhere. Any likely cause?

Here are the circuit diagrams:

http://rapidshare.com/files/241843238/PHILLIPS_CHASIS_FL_1.10.rar

http://rs738gc.rapidshare.com/files/241843238/7354033/PHILLIPS_CHASIS_FL_1.10.rar

- Franc Zabkar


Is the file available anywhere else?
Click to expand...
http://www.eserviceinfo.com/downloadsm/826/Philips_FL1.10.html

http://www.eserviceinfo.com/downloadsm/434/Philips_FL1.10.html
http://www.eserviceinfo.com/downloadsm/435/Philips_FL1.10.html


- Franc Zabkar
--
Please remove one 'i' from my address when replying by email.
 
"Franc Zabkar" <fzabkar@iinternode.on.net> wrote in message
news:8cmkj51fotll40mt3ven86d5fihquq5tcg@4ax.com...
On Tue, 29 Dec 2009 17:46:51 -0000, "ian field"
gangprobing.alien@ntlworld.com> put finger to keyboard and composed:


"Franc Zabkar" <fzabkar@iinternode.on.net> wrote in message
news:cs7jj5p61f8kcf4lr8436qts49o2chlhkb@4ax.com...
On Thu, 17 Dec 2009 16:53:03 +0000 (GMT), "Dave Plowman (News)"
dave@davenoise.co.uk> put finger to keyboard and composed:

This Philips TV model FL1.10 goes to standby when switched on - after a
brief flash from the LED displays. I'm guessing the SMPS is shutting
down
due to a fault elsewhere. Any likely cause?

Here are the circuit diagrams:

http://rapidshare.com/files/241843238/PHILLIPS_CHASIS_FL_1.10.rar

http://rs738gc.rapidshare.com/files/241843238/7354033/PHILLIPS_CHASIS_FL_1.10.rar

- Franc Zabkar


Is the file available anywhere else?

http://www.eserviceinfo.com/downloadsm/826/Philips_FL1.10.html

http://www.eserviceinfo.com/downloadsm/434/Philips_FL1.10.html
http://www.eserviceinfo.com/downloadsm/435/Philips_FL1.10.html


- Franc Zabkar
Click to expand...

Thanks.
 
In article <cs7jj5p61f8kcf4lr8436qts49o2chlhkb@4ax.com>,
Franc Zabkar <fzabkar@iinternode.on.net> wrote:
On Thu, 17 Dec 2009 16:53:03 +0000 (GMT), "Dave Plowman (News)"
dave@davenoise.co.uk> put finger to keyboard and composed:

This Philips TV model FL1.10 goes to standby when switched on - after a
brief flash from the LED displays. I'm guessing the SMPS is shutting down
due to a fault elsewhere. Any likely cause?

Here are the circuit diagrams:

http://rapidshare.com/files/241843238/PHILLIPS_CHASIS_FL_1.10.rar

http://rs738gc.rapidshare.com/files/241843238/7354033/PHILLIPS_CHASIS_FL_1.10.rar

- Franc Zabkar
Click to expand...
Bit late since it's sorted but thanks. I already have the service manual
anyway. But what service manuals never give is the common faults - hence
the post.

--
*When you've seen one shopping centre you've seen a mall*

Dave Plowman dave@davenoise.co.uk London SW
To e-mail, change noise into sound.
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top