Philips D110 tv slow start, dark fuzzy picture.

[bart bervoets]

I looked for bad caps and found some, replacing them did not made
any improvement.
As well resoldering of cracked solder joints around flyback and hot did not
made
any difference.
The symptoms are really like a bad cap, if i just could find one...
As well, the colors are not projected on top of each other but a bit off.
Anyone worked on this set before?
I just HATE that type of chassis, it's underside is full of smd parts, but
this one
really needs to be fixed.
Note that i had this set in a few months ago with a bad flyback, i used a
substitute from
hr diemen to get it running again, set had also hot shorted.

Bart Bervoets

 

[LASERandDVDfan]

I looked for bad caps and found some, replacing them did not made
any improvement.
As well resoldering of cracked solder joints around flyback and hot did not
made
any difference.
The symptoms are really like a bad cap, if i just could find one...
As well, the colors are not projected on top of each other but a bit off.
Anyone worked on this set before?
I just HATE that type of chassis, it's underside is full of smd parts, but
this one
really needs to be fixed.
Note that i had this set in a few months ago with a bad flyback, i used a
substitute from
hr diemen to get it running again, set had also hot shorted.

What are the fillament voltages on the picture tube itself? I think the tube
may be on it's way out. - Reinhart

 

[LASERandDVDfan]

I should have said "what ARE the fillament voltages" as opposed ot "what IS the
fillament voltages."

I guess one of the first things you lose when you are fatigued is the ability
to write with proper grammar. - Reinhart

 

[Nigel]

"bart bervoets" <nekobe@online.be> wrote in message
news:3f8335d7$0$31730$ba620e4c@reader1.news.skynet.be...

I looked for bad caps and found some, replacing them did not made
any improvement.
As well resoldering of cracked solder joints around flyback and hot did
not
made
any difference.
The symptoms are really like a bad cap, if i just could find one...

Are you certain this is a D110 not a G110 or CP110 chassis ??

If it's the CP110 then there's a modification to the PSU.

If it's the G110 then you have to fit a 30-piece modification kit available
from Philips - they also do a 14 piece one for sets that aren't fully cured
by the first kit !!

 

[Bart Bervoets]

It's a g110, sorry.
I try to get the kit.

Bart Bervoets
"Nigel" <Nigel@nospam.com> schreef in bericht
news:Mb%gb.7304$tv1.775361@news02.tsnz.net...

"bart bervoets" <nekobe@online.be> wrote in message
news:3f8335d7$0$31730$ba620e4c@reader1.news.skynet.be...
I looked for bad caps and found some, replacing them did not made
any improvement.
As well resoldering of cracked solder joints around flyback and hot did
not
made
any difference.
The symptoms are really like a bad cap, if i just could find one...

Are you certain this is a D110 not a G110 or CP110 chassis ??

If it's the CP110 then there's a modification to the PSU.

If it's the G110 then you have to fit a 30-piece modification kit
available
from Philips - they also do a 14 piece one for sets that aren't fully
cured
by the first kit !!