T
timppa
Guest
How can I get 3A to service mode? Do I need remote? How is mode operated? I
need to check/change channel selector value.
need to check/change channel selector value.
Navigation
Install the app
How to install the app on iOS
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
More options
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
A
Alain Beguin
Guest
"timppa" a écrit le/schreef op/wrote on 24/10/2003
On the set, there is one butto with a marking like a triangle with one
point down
On the remote control RC5991 there is one button with the marking like
a square on its side with an exclamation symbol
within it. (maybe with the word "print" on it.
You have to push those two buttons at the same time for a short while.
The only values in that menu that I remember are; E/W = 08 and Corner
E/W = 09
For the rest you will have to search...
Hope this helps,
Greetings,
Alain
--
alain dot beguin at tijd dot be
Icq/Skype/Msgr-audio
NL/FR/GB NewsReader: http://mesnews.no-ip.com
The only thing I can tell you;How can I get 3A to service mode? Do I need remote? How is mode operated? I
need to check/change channel selector value.
On the set, there is one butto with a marking like a triangle with one
point down
On the remote control RC5991 there is one button with the marking like
a square on its side with an exclamation symbol
within it. (maybe with the word "print" on it.
You have to push those two buttons at the same time for a short while.
The only values in that menu that I remember are; E/W = 08 and Corner
E/W = 09
For the rest you will have to search...
Hope this helps,
Greetings,
Alain
--
alain dot beguin at tijd dot be
Icq/Skype/Msgr-audio
NL/FR/GB NewsReader: http://mesnews.no-ip.com
T
timppa
Guest
Thanks!
I managed to get to serv.mode now.
It needed that mono button and timer/sleep button sametime.
Now I have menu which looks like this.
Center of screen:
-- --
I managed to change mem blocks.
Those look like this:
01 39
02 20
03 08
04 01
05 42
06 14
07 39
08 --
09 --
10 --
11 --
12 --
13 --
14--
I can also cnahge values, but how I can store those? I haven't found correct
mem block and value for channeselector, but still looking for it...
-Tim-
"Alain Beguin" <me2@privacy.net> kirjoitti
viestissä:mesnews.cbea7d3a.6905becb.4.1714@privacy.net...
I managed to get to serv.mode now.
It needed that mono button and timer/sleep button sametime.
Now I have menu which looks like this.
Center of screen:
-- --
I managed to change mem blocks.
Those look like this:
01 39
02 20
03 08
04 01
05 42
06 14
07 39
08 --
09 --
10 --
11 --
12 --
13 --
14--
I can also cnahge values, but how I can store those? I haven't found correct
mem block and value for channeselector, but still looking for it...
-Tim-
"Alain Beguin" <me2@privacy.net> kirjoitti
viestissä:mesnews.cbea7d3a.6905becb.4.1714@privacy.net...
"timppa" a écrit le/schreef op/wrote on 24/10/2003
How can I get 3A to service mode? Do I need remote? How is mode
operated? I
need to check/change channel selector value.
The only thing I can tell you;
On the set, there is one butto with a marking like a triangle with one
point down
On the remote control RC5991 there is one button with the marking like
a square on its side with an exclamation symbol
within it. (maybe with the word "print" on it.
You have to push those two buttons at the same time for a short while.
The only values in that menu that I remember are; E/W = 08 and Corner
E/W = 09
For the rest you will have to search...
Hope this helps,
Greetings,
Alain
--
alain dot beguin at tijd dot be
Icq/Skype/Msgr-audio
NL/FR/GB NewsReader: http://mesnews.no-ip.com
T
timppa
Guest
Thanks!
I managed to get to serv.mode now.
It needed that mono button and timer/sleep button sametime.
Now I have menu which looks like this.
Center of screen:
-- --
I managed to change mem blocks.
Those look like this:
01 39
02 20
03 08
04 01
05 42
06 14
07 39
08 --
09 --
10 --
11 --
12 --
13 --
14--
I can also cnahge values, but how I can store those? I haven't found correct
mem block and value for channeselector, but still looking for it...
-Tim-
"Alain Beguin" <me2@privacy.net> kirjoitti
viestissä:mesnews.cbea7d3a.6905becb.4.1714@privacy.net...
I managed to get to serv.mode now.
It needed that mono button and timer/sleep button sametime.
Now I have menu which looks like this.
Center of screen:
-- --
I managed to change mem blocks.
Those look like this:
01 39
02 20
03 08
04 01
05 42
06 14
07 39
08 --
09 --
10 --
11 --
12 --
13 --
14--
I can also cnahge values, but how I can store those? I haven't found correct
mem block and value for channeselector, but still looking for it...
-Tim-
"Alain Beguin" <me2@privacy.net> kirjoitti
viestissä:mesnews.cbea7d3a.6905becb.4.1714@privacy.net...
"timppa" a écrit le/schreef op/wrote on 24/10/2003
How can I get 3A to service mode? Do I need remote? How is mode
operated? I
need to check/change channel selector value.
The only thing I can tell you;
On the set, there is one butto with a marking like a triangle with one
point down
On the remote control RC5991 there is one button with the marking like
a square on its side with an exclamation symbol
within it. (maybe with the word "print" on it.
You have to push those two buttons at the same time for a short while.
The only values in that menu that I remember are; E/W = 08 and Corner
E/W = 09
For the rest you will have to search...
Hope this helps,
Greetings,
Alain
--
alain dot beguin at tijd dot be
Icq/Skype/Msgr-audio
NL/FR/GB NewsReader: http://mesnews.no-ip.com
E
eddumweer
Guest
"timppa" <builder@luukku.com_pois> schreef in bericht
news:0cKmb.13$TV.3@read3.inet.fi...
depending the hardware (channelselector, txt.... ) the value must be 040 or
40.
Store everything you change "directly" with the pp-button (personal setting)
or green button at the top of the rc5991
Have you mounted 2 zenerdiodes 5V6 fover the eeprom from ground to sda and
from ground to scl. It's a modification for static problems made by Philips
Greetings Peter
news:0cKmb.13$TV.3@read3.inet.fi...
I thought that the value for the channelselector must be in 12 or higher andThanks!
I managed to get to serv.mode now.
It needed that mono button and timer/sleep button sametime.
Now I have menu which looks like this.
Center of screen:
-- --
I managed to change mem blocks.
Those look like this:
01 39
02 20
03 08
04 01
05 42
06 14
07 39
08 --
09 --
10 --
11 --
12 --
13 --
14--
I can also cnahge values, but how I can store those? I haven't found
correct
mem block and value for channeselector, but still looking for it...
depending the hardware (channelselector, txt.... ) the value must be 040 or
40.
Store everything you change "directly" with the pp-button (personal setting)
or green button at the top of the rc5991
Have you mounted 2 zenerdiodes 5V6 fover the eeprom from ground to sda and
from ground to scl. It's a modification for static problems made by Philips
Greetings Peter
T
timppa
Guest
"eddumweer" <nospampeternoprincenno@home.nl> kirjoitti
viestissä:bnga2o$vi8$1@news2.tilbu1.nb.home.nl...
Only value that is changed over memblock 7 is 11. 12 cannot be changed or
something is broken.
I have to look for that pp button (code) because I use CME replacement
remote that don't have such...
Bit hard.
If I manage to change and find correct channel selector value I will install
those zeners.
This tv model is not very service friendly... at all.
viestissä:bnga2o$vi8$1@news2.tilbu1.nb.home.nl...
Thanks for information!"timppa" <builder@luukku.com_pois> schreef in bericht
news:0cKmb.13$TV.3@read3.inet.fi...
Thanks!
I managed to get to serv.mode now.
It needed that mono button and timer/sleep button sametime.
Now I have menu which looks like this.
Center of screen:
-- --
I managed to change mem blocks.
Those look like this:
01 39
02 20
03 08
04 01
05 42
06 14
07 39
08 --
09 --
10 --
11 --
12 --
13 --
14--
I can also cnahge values, but how I can store those? I haven't found
correct
mem block and value for channeselector, but still looking for it...
I thought that the value for the channelselector must be in 12 or higher
and
depending the hardware (channelselector, txt.... ) the value must be 040
or
40.
Only value that is changed over memblock 7 is 11. 12 cannot be changed or
something is broken.
I have to look for that pp button (code) because I use CME replacement
remote that don't have such...
Bit hard.
If I manage to change and find correct channel selector value I will install
those zeners.
This tv model is not very service friendly... at all.
Store everything you change "directly" with the pp-button (personal
setting)
or green button at the top of the rc5991
Have you mounted 2 zenerdiodes 5V6 fover the eeprom from ground to sda and
from ground to scl. It's a modification for static problems made by
Philips
Greetings Peter