Philips 32PW6516 - Prob. changing ch./vol.

  • Thread starter rg26ce1991@hotmail.com
  • Start date
R

rg26ce1991@hotmail.com

Guest
Greetings group.
Philips ctv model 32PW6516/75R.
This problem is very random.

Sometimes the ctv will not respond to the remote control, but it will
still respond to the vol. and ch. switches on the ctv.

At other times, the switches on the ctv will not change the vol. or ch.

I have just ordered a schematic.
Has anyone seen this problem before?

Thanks,
Russell Griffiths
 
On 15 Sep 2005 06:52:53 -0700, "rg26ce1991@hotmail.com"
<rg26ce1991@hotmail.com> put finger to keyboard and composed:

Greetings group.
Philips ctv model 32PW6516/75R.
This problem is very random.

Sometimes the ctv will not respond to the remote control, but it will
still respond to the vol. and ch. switches on the ctv.
I've seen leaky signal diodes (eg 1N4148) around the key matrix cause
such a problem. On one occasion the problem was caused by water damage
in that area. Could also be a stuck switch or key.

At other times, the switches on the ctv will not change the vol. or ch.
Are you sure the remote is facing away from the TV when you do this?

-- Franc Zabkar

Please remove one 'i' from my address when replying by email.
 
Thanks for the reply Frank.
Yes Frank, I am sure the remote is not causing the problem.

I have tried disconnecting the IR receiver in the ctv, and the switches
on the set still sometimes fail to change the vol./ch.

Thanks,
Russell.
 

Welcome to EDABoard.com

Sponsor

Back
Top