Philips 21GR2350/05b TV turns on then off continuously with

[larry]

Hi everyone!

I have a Philips 21GR2350/05b TV which is very old and served me well up to now.

But a few months back, it would completely switch on and off at around 2Hz when I first turned it on, eventually remaining on after say 5 seconds with a perfect picture. Today it takes up to a minute before finally switching on, but now there doesn't appear to be an image from the green raster with the image rather dim.

I've a feeling it's something to do with the power supply possibly not turning on properly, but I'd like to know for sure from you guys.

Thanks in advance,

Larry

 

If it is a newer one, it is possibly a weak CRT. Alot of the last CRT TVs out there had AKB which is Automatic Kine bias which adjusts the greyscale continuously. This allowed them to use crappy CRTs and have the set be unwatchable after they got to a certain point of weakness. This would necessitate the purchase of another set, which is their goal.

You could try wrapping the fly, which means to put a inding around the core to substitute the filament supply to the cRT but a higher viltage. this is the same thing as putting a brightener on it in the old days. There should be some instructions on the net somewhere. You'll need some wire, a razor knife and a soldering iron and solder.

It doesn't always work, and soetimes induces an interelectrode short oin the CRT, but you probably got nothing to lose. These days, CRT TVs are worth about five bucks if they work well. Some really nice vintage models more, but that ain't what you got.

Really, if you got a car, look on Craigslst in "free". They are giving away $3,000 HD home theater projection TVs these days. And I mean working. That's why I don't work on TVs anymore.

If you are out to learnelectronics, that particular unit is not the best thing in the world to start on, audio equipment would be better. Get you a used scope off eBay or something if you really want an education. A CRO, (cathode ray) not an LCD.

Actually, TVs have become almost ipossible to service. Some of them don't just blank the picture if the CRT is weak, they go into protection and you have to unplug them to get it back. The manufacturers really stuck it to people. I wouldn't give a dollar for any TV built within the last two decades. I was going to restore my vintage Sony XBR (KPR36XBR) built in 1989 which sold for two grand new, but I blew that off. And let me tellya, I would pit the picture on that thing with anything when working properly. No HD needed, it was that sharp. If any TV of that era could be called a collector's item that would be it.

But it went out to the curb last year. Still have a good blue CRT for it on Craigslist. No bites.