phase/frequency detector

J

jghasemi

Guest
In a specific application I should compare the phase/frequency of two
signals and make a voltage proportional to their phase/frequency
difference. I want to connect this signal to the input of a VCSO.
I’ve XORed these signals and then connected them to the inputs of an
Op-Amp but I’m looking for a better way.
 
On Fri, 7 Nov 2008 07:24:21 -0800 (PST), jghasemi <jghasemi@gmail.com>
wrote:

In a specific application I should compare the phase/frequency of two
signals and make a voltage proportional to their phase/frequency
difference. I want to connect this signal to the input of a VCSO.
I’ve XORed these signals and then connected them to the inputs of an
Op-Amp but I’m looking for a better way.
---
http://www.maxim-ic.com/appnotes.cfm/an_pk/1130

JF
 
On Fri, 07 Nov 2008 07:24:21 -0800, jghasemi wrote:

In a specific application I should compare the phase/frequency of two
signals and make a voltage proportional to their phase/frequency
difference. I want to connect this signal to the input of a VCSO. I’ve
XORed these signals and then connected them to the inputs of an Op-Amp
but I’m looking for a better way.
Do you mean VCXO?

Better how?

What are you really trying to do?

--

Tim Wescott
Wescott Design Services
http://www.wescottdesign.com

Do you need to implement control loops in software?
"Applied Control Theory for Embedded Systems" gives you just what it says.
See details at http://www.wescottdesign.com/actfes/actfes.html
 
On Nov 8, 7:15 am, Tim Wescott <t...@justseemywebsite.com> wrote:
On Fri, 07 Nov 2008 07:24:21 -0800, jghasemi wrote:
In a specific application I should compare the phase/frequency of two
signals and make a voltage proportional to their phase/frequency
difference. I want to connect this signal to the input of a VCSO. I’ve
XORed these signals and then connected them to the inputs of an Op-Amp
but I’m looking for a better way.

Do you mean VCXO?

Better how?

What are you really trying to do?

--

Tim Wescott
Wescott Design Serviceshttp://www.wescottdesign.com

Do you need to implement control loops in software?
"Applied Control Theory for Embedded Systems" gives you just what it says..
See details athttp://www.wescottdesign.com/actfes/actfes.html
Thanks Tim,
I’m trying to transmit STM64 over OTN using AMCC OTN wrapper. The AMCC
S19203 divides input and output stream frequency and gives them to
feed an external PLL. I should compare the phase of these signals and
make the output stream reference clock. The output frequency of
dividers is 50MHz.
I’ve opted VS751 to make the desired reference clock. The VS751 give
an input voltage (proportional to the phase difference) to control the
output frequency. Now I want to know how to make a voltage
proportional to the phase difference.
 
jghasemi wrote:
On Nov 8, 7:15 am, Tim Wescott <t...@justseemywebsite.com> wrote:
On Fri, 07 Nov 2008 07:24:21 -0800, jghasemi wrote:
In a specific application I should compare the phase/frequency of two
signals and make a voltage proportional to their phase/frequency
difference. I want to connect this signal to the input of a VCSO. I’ve
XORed these signals and then connected them to the inputs of an Op-Amp
but I’m looking for a better way.
Do you mean VCXO?

Better how?

What are you really trying to do?

--

Tim Wescott
Wescott Design Serviceshttp://www.wescottdesign.com

Do you need to implement control loops in software?
"Applied Control Theory for Embedded Systems" gives you just what it says.
See details athttp://www.wescottdesign.com/actfes/actfes.html

Thanks Tim,
I’m trying to transmit STM64 over OTN using AMCC OTN wrapper. The AMCC
S19203 divides input and output stream frequency and gives them to
feed an external PLL. I should compare the phase of these signals and
make the output stream reference clock. The output frequency of
dividers is 50MHz.
I’ve opted VS751 to make the desired reference clock. The VS751 give
an input voltage (proportional to the phase difference) to control the
output frequency. Now I want to know how to make a voltage
proportional to the phase difference.

Do some web searches on PLL techniques. Or get a book -- I like this
one: http://www.powells.com/partner/30696/biblio/0136627439, but that's
just because I took the class from Dr. Wolaver. Just about any good PLL
book will get you there.

The phase-frequency detector that John Fields suggested is probably a
good place to start.

--

Tim Wescott
Wescott Design Services
http://www.wescottdesign.com

Do you need to implement control loops in software?
"Applied Control Theory for Embedded Systems" gives you just what it says.
See details at http://www.wescottdesign.com/actfes/actfes.html
 

Welcome to EDABoard.com

Sponsor

Back
Top