PCI core and Cyclone

R

Roberto Gallo

Guest
Hello

I am wondering if it is feasible to use a PCI 32bit target Altera
Megacore with a Low Speed Cyclone device, EP1C6 grade -8. Is this FPGA fast
enough?

Roberto Gallo
 
Roberto Gallo wrote:

Hello

I am wondering if it is feasible to use a PCI 32bit target Altera
Megacore with a Low Speed Cyclone device, EP1C6 grade -8. Is this FPGA fast
enough?

Roberto Gallo
Click to expand...
Well, my earlier design (Leonardo for synthesis -- blech!) and Quartus
for P&R... fmax was more than 90MHz for the -8 part IIRC. Target PSI
only. We're moving to master/target, but we're only 33 MHz, so I'm not
worried.

If you want to do 66MHz, you might want to call Altera.

HTH
 
Thank you.

"dbtid" <dbtid@dev-null.us> wrote in message
news:dc0230a81bd71035c8245f656247a93a@news.teranews.com...
Roberto Gallo wrote:

Hello

I am wondering if it is feasible to use a PCI 32bit target Altera
Megacore with a Low Speed Cyclone device, EP1C6 grade -8. Is this FPGA
fast
enough?

Roberto Gallo

Well, my earlier design (Leonardo for synthesis -- blech!) and Quartus
for P&R... fmax was more than 90MHz for the -8 part IIRC. Target PSI
only. We're moving to master/target, but we're only 33 MHz, so I'm not
worried.

If you want to do 66MHz, you might want to call Altera.

HTH
Click to expand...
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top