pcellEvalFailed

A

aditya

Guest
Hi
I am using NCSU CDK 1.3 with latest (5.x.x) version . I am trying to
generate a pcell from the NCSU ami 0.5 library . I get a box in my
layout editor "pcellEvalFailed" . I checked if the macro is present .
There is a layout present for the pcell but it is empty . I guess the
error is bcaz there is no layout in the macro(Pcell). B4 doing all
this I hapened to delete a ami1.5 library accidentally . Did this
effect the macros in 0.5 AMI library????. I am stumped I do not know
how to reinstall the whole kit again .

Is this problem solvable with out reinstalling the kit???? Or am I
cmpltely lost on this poblem.

any help would be appeciated

aditya
 
This was a stupid question to ask in the firest plcae . I didnt
compile the tech library so no wonder the pcells were not there . I
figured this out after posting the message.










adityagarapati@hotmail.com (aditya) wrote in message news:<512d5a9c.0406111754.29e58f29@posting.google.com>...
Hi
I am using NCSU CDK 1.3 with latest (5.x.x) version . I am trying to
generate a pcell from the NCSU ami 0.5 library . I get a box in my
layout editor "pcellEvalFailed" . I checked if the macro is present .
There is a layout present for the pcell but it is empty . I guess the
error is bcaz there is no layout in the macro(Pcell). B4 doing all
this I hapened to delete a ami1.5 library accidentally . Did this
effect the macros in 0.5 AMI library????. I am stumped I do not know
how to reinstall the whole kit again .

Is this problem solvable with out reinstalling the kit???? Or am I
cmpltely lost on this poblem.

any help would be appeciated

aditya
Click to expand...
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top