PCB Riston Etching

[Andrew Howard]

Does anyone know of a good source of instructions for the full process of
making a PCB through the use of Riston coated PCBs, UV boxes, etching tanks,
etc?

Thanks
Andrew Howard

 

[JeffM]

source of instructions for the full process of
making a PCB through the use of Riston coated PCBs, UV boxes, etching
tanks,
Andrew Howard

Started here:
http://www.google.com/search?num=100&hl=en&lr=lang_en&ie=UTF-8&oe=UTF-8&q=Riston+PCBs+OR+PCB&btnG=Google+Search
Found this right off:
http://www.google.com/search?num=100&hl=en&lr=lang_en&ie=UTF-8&oe=UTF-8&q=Riston+PCBs+OR+PCB+jmelson+OR+groups-yahoo+OR+jaycar&btnG=Google+Search

Didn't even try "printed circuit" or "printed wiring".

 

[Andrew Howard]

"JeffM" <jeffm_@email.com> wrote in message ...

source of instructions for the full process of
making a PCB through the use of Riston coated PCBs, UV boxes, etching
tanks,
Andrew Howard

Started here:

http://www.google.com/search?num=100&hl=en&lr=lang_en&ie=UTF-8&oe=UTF-8&q=Riston+PCBs+OR+PCB&btnG=Google+Search
Found this right off:

http://www.google.com/search?num=100&hl=en&lr=lang_en&ie=UTF-8&oe=UTF-8&q=Riston+PCBs+OR+PCB+jmelson+OR+groups-yahoo+OR+jaycar&btnG=Google+Search

Didn't even try "printed circuit" or "printed wiring".

The second one leads to a dead link. I can do a google search, but i was
asking whether anyone knows of a known, good resource.

Thanks anyway though

Andrew Howard

 

[JeffM]

http://www.google.com/search?num=100&hl=en&lr=lang_en&ie=UTF-8&oe=UTF-8&q=Riston+PCBs+OR+PCB+jmelson+OR+groups-yahoo+OR+jaycar&btnG=Google+Search

The second one leads to a dead link.
Andrew Howard

No it doesn't.
If your newsreader doesn't underline ALL of the link,
cut and paste it into your browser.

 

[Andrew Howard]

"JeffM" wrote in message...

http://www.google.com/search?num=100&hl=en&lr=lang_en&ie=UTF-8&oe=UTF-8&q=
Riston+PCBs+OR+PCB+jmelson+OR+groups-yahoo+OR+jaycar&btnG=Google+Search

The second one leads to a dead link.
Andrew Howard

No it doesn't.
If your newsreader doesn't underline ALL of the link,
cut and paste it into your browser.

I can get to the google page easily enough, the problem is the page that it
links to is dead.

Anyway, I have bought all of the stuff, experimented a bit, and managed to
turn out a quite reasonably sounding Fender Blender effects pedal.

Thanks for your help though.

Andrew Howard

 

[JeffM]

...the page that it links to is dead.
Andrew Howard

Did you click on the "Cached" link?
Not only does Google keep old stuff cached,
the search terms on the cached page are highlighted.

No charge for the tut.