PCB Film Reusable Stencil

[Okidokee]

Does any one know where I can get a film I used one time that is like the
ones screen printers use, is coated blue and once exposed can be used as a
stencil for etching over and over again a good many times?
After being exposed it is put in a developer and developed for about 30
seconds. The great thing about this stuff is that it can be used as a
stencil repeatedly instead of having to expose a new board each time. You
can just keep using the stencil.

Thanks

 

[Robert Baer]

Okidokee wrote:

Does any one know where I can get a film I used one time that is like the
ones screen printers use, is coated blue and once exposed can be used as a
stencil for etching over and over again a good many times?
After being exposed it is put in a developer and developed for about 30
seconds. The great thing about this stuff is that it can be used as a
stencil repeatedly instead of having to expose a new board each time. You
can just keep using the stencil.

Thanks

It appears that this "film" that you refer to, has some kind of
sticky surface, so that it adheres to the copper, thereby preventing
liquid etchant from working in the undeveloped areas.
It also would have to have an overall supporting matrix, and so act
like a silk screen.
About 20 years ago (or so) i remember seeing a non-sticky silk screen
material that could be exposed (UV light, sun, fluroescents) and then
developed; used in the arts for making greeting cards, posters, etc.
Snoop around art supply stores, maybe you can find something like this.

 

[Rich Grise]

On Sunday 03 October 2004 03:42 pm, Okidokee did deign to grace us with the
following:

Does any one know where I can get a film I used one time that is like the
ones screen printers use, is coated blue and once exposed can be used as a
stencil for etching over and over again a good many times?
After being exposed it is put in a developer and developed for about 30
seconds. The great thing about this stuff is that it can be used as a
stencil repeatedly instead of having to expose a new board each time. You
can just keep using the stencil.

At my client's factory they mark parts by electroetching them, and

their stencils are blue - just a flimsy film with a heavy paper backing.
You type on them, or use a dot matrix printer, and it makes the blue
film porous. Try a search on Marking Methods Inc or The Lectroetch Co.

Good Luck!
Rich