PCB fabs (yet again)

[who where]

Noted that the current setup charges at pcbcart seemed to be
skyrocketing. (Are they sponsoring the Chinese space effort?)

So the question now is, who does that leave as an affordable supplier
of low volume boards with decent quality?

 

[Jasen Betts]

On 2012-07-03, who where <noone@home.net> wrote:

Noted that the current setup charges at pcbcart seemed to be
skyrocketing. (Are they sponsoring the Chinese space effort?)

So the question now is, who does that leave as an affordable supplier
of low volume boards with decent quality?

seeedstudio.com (click services on the left)
I can't comment on quality, I have not tried them yet.

--
⚂⚃ 100% natural

--- Posted via news://freenews.netfront.net/ - Complaints to news@netfront.net ---

 

[who where]

On 4 Jul 2012 02:52:41 GMT, Jasen Betts <jasen@xnet.co.nz> wrote:

On 2012-07-03, who where <noone@home.net> wrote:
Noted that the current setup charges at pcbcart seemed to be
skyrocketing. (Are they sponsoring the Chinese space effort?)

So the question now is, who does that leave as an affordable supplier
of low volume boards with decent quality?

seeedstudio.com (click services on the left)
I can't comment on quality, I have not tried them yet.

Won't take AutoTrax format files.

Wound up using PCBWING. Quality good, but all holes <1mm in dia were
fabbed as 1mm. Oversized PTH are a PITA. They reckon this won't
happen again. On our second batch of orders, this will be the
critical test.