Panasonic PV-1560 VCR, need D-14 diode p/n

Guest
I need a replacement part number ( or ratings ) for a zener diode (
shorted ) in a Panasonic VCR model no. PV-1560, power supply VEPS 0162,
marked D-14 on the board.
NOTE: Please REMOVE the NS from my email to reply in person, or post to
group.
 
It is an 18 volt 1 watt zener diode. It shorted because of a regulation
problem in the supply. It will short again when replaced unless this problem
is fixed. Probably bad capacitors. Considering the age, I recommend
replacing ALL the electrolytic capacitors on the secondary side, along with
the 4.7 uF or 10 uF on the primary side.


Mark Z.


<NSworley45@aol.com> wrote in message news:3F7E5C6E.46FD6C6F@aol.com...
I need a replacement part number ( or ratings ) for a zener diode (
shorted ) in a Panasonic VCR model no. PV-1560, power supply VEPS 0162,
marked D-14 on the board.
NOTE: Please REMOVE the NS from my email to reply in person, or post to
group.
 

Welcome to EDABoard.com

Sponsor

Back
Top