Panasonic NV-SD200

[Andre]

Hi group
Any ideas on this one ? I saw a reference to it in the "Repair Briefs"
someplace but nothing about correct mode switch alignment . Nothing
about this on Google, except what I already know about the loading
motor.

The usual F-03 or F-04 on startup . Helpfully located screw under tape
didn't help matters.

I applied the repair kit and I thought i had fixed it then it went
wrong again .

Anyone ?

-A

 

[Loris Duranti]

I've got the Panasonic K-Deck Service Manual with the full phase alignment procedure.
If you want, I can send it by E-mail but, it's a 3MB PDF file: let me know ...

Regards, Loris.


Andre <testing_h@yahoo.com> wrote in message news:2c2cf14c.0309162255.280396af@posting.google.com...

Hi group
Any ideas on this one ? I saw a reference to it in the "Repair Briefs"
someplace but nothing about correct mode switch alignment . Nothing
about this on Google, except what I already know about the loading
motor.

The usual F-03 or F-04 on startup . Helpfully located screw under tape
didn't help matters.

I applied the repair kit and I thought i had fixed it then it went
wrong again .

Anyone ?

 

[eddumokweer]

Clean the contact at the pcb and the modeselectswitch with a glasfiberbrush,
they could be oxidated.

Greetings Peter

"Andre" <testing_h@yahoo.com> schreef in bericht
news:2c2cf14c.0309162255.280396af@posting.google.com...

Hi group
Any ideas on this one ? I saw a reference to it in the "Repair Briefs"
someplace but nothing about correct mode switch alignment . Nothing
about this on Google, except what I already know about the loading
motor.

The usual F-03 or F-04 on startup . Helpfully located screw under tape
didn't help matters.

I applied the repair kit and I thought i had fixed it then it went
wrong again .

Anyone ?

-A

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.515 / Virus Database: 313 - Release Date: 1-9-2003