R
Roger A
Guest
Hello!
I have a problem with my Panasonic NV-FJ620 video.
I can't see any mechanical problems more. I replaced a part i nylon which I
noticed was just worn. A wheel which "teeth" wasn't so fine. But I think it
still was working well.
However I replaced it for not having problem in the future when it goes even
more worn.
But I don't think that was the main problem. The main problem is that when
loading a cassette, the cassette just go down the loading process. After
that the loading motor changes direction and make the movement in opposite
direction. The cassette is thrown out again.
What does it depend on ?
I have a litte idea. Could it depend on the optical sensors which detecting
tape end are worn and doesn't work ?
I seems to be a electronical problem?
I dismounted the loading motor and loading wheel then I simulated the
loading process manually.
The mechanicals work 100% and the loading arm goes forward after the
cassette elevator is in loaded position.
The fault codes for my Panasonic NV-FJ620, that I described recently in this
group:
0 00 00
1 03 00
2 00 06
3 00 00
4 00
5 11 00
6 -1 00
7 00 00
I don't know what thar codes means.
I got a tips on internet, how to get them.
Hope they can tell what's wrong in the video!
Excuse my English grammar...
Hope that you can help me!
Best regards
SM6SKZ, Roger in Sweden
I have a problem with my Panasonic NV-FJ620 video.
I can't see any mechanical problems more. I replaced a part i nylon which I
noticed was just worn. A wheel which "teeth" wasn't so fine. But I think it
still was working well.
However I replaced it for not having problem in the future when it goes even
more worn.
But I don't think that was the main problem. The main problem is that when
loading a cassette, the cassette just go down the loading process. After
that the loading motor changes direction and make the movement in opposite
direction. The cassette is thrown out again.
What does it depend on ?
I have a litte idea. Could it depend on the optical sensors which detecting
tape end are worn and doesn't work ?
I seems to be a electronical problem?
I dismounted the loading motor and loading wheel then I simulated the
loading process manually.
The mechanicals work 100% and the loading arm goes forward after the
cassette elevator is in loaded position.
The fault codes for my Panasonic NV-FJ620, that I described recently in this
group:
0 00 00
1 03 00
2 00 06
3 00 00
4 00
5 11 00
6 -1 00
7 00 00
I don't know what thar codes means.
I got a tips on internet, how to get them.
Hope they can tell what's wrong in the video!
Excuse my English grammar...
Hope that you can help me!
Best regards
SM6SKZ, Roger in Sweden