Palm m105 Memory Backup Capacitor

  • Thread starter Martin & Debbie Ghioto
  • Start date
M

Martin & Debbie Ghioto

Guest
I am looking for a source for this cap, which is an Elna DSK-3R3H224-H .
I've done a Google search and have had no success in finding a supplier for
a small quantity (5-10 pieces). The Panasonic EECEN0F204 would also work.
These are surface mount caps rated at 3.3V, 0.22F. Anybody know a source for
these caps or an equivalent I don't know about? Thank you.
 
It depends which country you're in.. most larger U.S. parts distributors
sell these memory (back-up) capacitors.

You might try searching electronic parts (or components) suppliers,
distributors dealers.

MCM, Digi-Key, Mouser and many more probably stock these caps

WB
..............

"Martin & Debbie Ghioto" <ghiotom@comcast.net> wrote in message
news:TnNgb.241705$mp.152048@rwcrnsc51.ops.asp.att.net...
I am looking for a source for this cap, which is an Elna DSK-3R3H224-H .
I've done a Google search and have had no success in finding a supplier
for
a small quantity (5-10 pieces). The Panasonic EECEN0F204 would also work.
These are surface mount caps rated at 3.3V, 0.22F. Anybody know a source
for
these caps or an equivalent I don't know about? Thank you.
Click to expand...
 
You would think that here in the States they would. Mouser has them listed
on their website, but I would have to get 1500 of them. Nothing at Digi-Key.
I finally ordered the Panasonic caps from Newark, but it is going to take 3
weeks. They have to get them from their sister company in England!
 
I'm also searchin for 2 caps "memory back-up" for a M125,..
BUT i dont know witch part number it is.

Where did u find yours? (part number) and do you know if it is the same part
for both M105 and M125 ???



"Martin & Debbie Ghioto" <ghiotom@comcast.net> wrote in message
news:TnNgb.241705$mp.152048@rwcrnsc51.ops.asp.att.net...
I am looking for a source for this cap, which is an Elna DSK-3R3H224-H .
I've done a Google search and have had no success in finding a supplier
for
a small quantity (5-10 pieces). The Panasonic EECEN0F204 would also work.
These are surface mount caps rated at 3.3V, 0.22F. Anybody know a source
for
these caps or an equivalent I don't know about? Thank you.
Click to expand...
 
I lost your original post,..can you post part number again please.

I need these caps too, for a M125.




"Wild Bill" <kwag98@usachoice.net> wrote in message
news:3f86365c_4@127.0.0.1...
It depends which country you're in.. most larger U.S. parts distributors
sell these memory (back-up) capacitors.

You might try searching electronic parts (or components) suppliers,
distributors dealers.

MCM, Digi-Key, Mouser and many more probably stock these caps

WB
.............

"Martin & Debbie Ghioto" <ghiotom@comcast.net> wrote in message
news:TnNgb.241705$mp.152048@rwcrnsc51.ops.asp.att.net...
I am looking for a source for this cap, which is an Elna DSK-3R3H224-H .
I've done a Google search and have had no success in finding a supplier
for
a small quantity (5-10 pieces). The Panasonic EECEN0F204 would also
work.
These are surface mount caps rated at 3.3V, 0.22F. Anybody know a source
for
these caps or an equivalent I don't know about? Thank you.
Click to expand...
 
I've to change caps in my M125 too.
Where do you get parts number for your M105?
Do you think it is the same as M125?

I tried to get part number from Palm but,...all they can say is "DO NOT OPEN
IT!!!"

Thanks
Chris

"Martin & Debbie Ghioto" <ghiotom@comcast.net> wrote in message
news:TnNgb.241705$mp.152048@rwcrnsc51.ops.asp.att.net...
I am looking for a source for this cap, which is an Elna DSK-3R3H224-H .
I've done a Google search and have had no success in finding a supplier
for
a small quantity (5-10 pieces). The Panasonic EECEN0F204 would also work.
These are surface mount caps rated at 3.3V, 0.22F. Anybody know a source
for
these caps or an equivalent I don't know about? Thank you.
Click to expand...
 
Did you try Gethightech?

jak

"Christian B." <chrbouch@(remove).hotmail.com> wrote in message
news:bmffs1$llv$1@sklad.atcom.net.pl...
I've to change caps in my M125 too.
Where do you get parts number for your M105?
Do you think it is the same as M125?

I tried to get part number from Palm but,...all they can say is "DO NOT
OPEN
IT!!!"

Thanks
Chris

"Martin & Debbie Ghioto" <ghiotom@comcast.net> wrote in message
news:TnNgb.241705$mp.152048@rwcrnsc51.ops.asp.att.net...
I am looking for a source for this cap, which is an Elna DSK-3R3H224-H .
I've done a Google search and have had no success in finding a supplier
for
a small quantity (5-10 pieces). The Panasonic EECEN0F204 would also
work.
These are surface mount caps rated at 3.3V, 0.22F. Anybody know a source
for
these caps or an equivalent I don't know about? Thank you.
Click to expand...
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top