Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I route single sided board and I cannot use jumpers? When I'am trying
to put a jumper on track a message appears "Can't add jumper". When
I'am trying to put a jumper while routing nothing is happend, my comand
(Ctrl + Alt + J) is quite ignored?? What is wrong??
mili,
Do you have the jumper feature in the modules you are running? Do you
have a secondary module that may be required for the module containing
jumpers ot work? PADs is riddled with requirements for different
mosules/functions/features to function. I don't have the answer but know
from my past experience that you used to need about 3
expansion/advanced/feature modules before the jumper feature would work.
--
Sincerely,
Brad Velander.
"mili" <franjo.pongrac@gmail.com> wrote in message
news:1147533627.175616.211920@v46g2000cwv.googlegroups.com...
I route single sided board and I cannot use jumpers? When I'am trying
to put a jumper on track a message appears "Can't add jumper". When
I'am trying to put a jumper while routing nothing is happend, my comand
(Ctrl + Alt + J) is quite ignored?? What is wrong??
Yes I can. But that resistor must bi put in the scheme then. That willCan't you add a resistor with a value of 0 ohms?