p5-75 boot issues

Guest
My old 1995 GW2k P5-75 doesn't boot right.
First clue is the clock is at zero, so batt is dead.
But it requires me to get in and out of setup to get it to boot.

Is there any workaround, even if I don't replace the battery?


- = -
Vasos Panagiotopoulos, Columbia'81+, Reagan, Mozart, Pindus, BioStrategist
http://www.panix.com/~vjp2/vasos.htm
---{Nothing herein constitutes advice. Everything fully disclaimed.}---
[Homeland Security means private firearms not lazy obstructive guards]
[Urb sprawl confounds terror] [Phooey on GUI: Windows for subprime Bimbos]
 
<vjp2.at@at.BioStrategist.dot.dot.com> wrote in message
news:k6a21b$goh$1@reader1.panix.com...
My old 1995 GW2k P5-75 doesn't boot right.
First clue is the clock is at zero, so batt is dead.
But it requires me to get in and out of setup to get it to boot.

Is there any workaround, even if I don't replace the battery?


- = -
Vasos Panagiotopoulos, Columbia'81+, Reagan, Mozart, Pindus,
BioStrategist
http://www.panix.com/~vjp2/vasos.htm
---{Nothing herein constitutes advice. Everything fully disclaimed.}---
[Homeland Security means private firearms not lazy obstructive guards]
[Urb sprawl confounds terror] [Phooey on GUI: Windows for subprime
Bimbos]
Click to expand...

This ancient pc I'm using here , the batt I bridged across with large ZnO
batteries and diode years ago .
Soldered on eires with pc power off but battery in place , otherwise a hell
of a work up to remove the original. A couple of years ago had to replace
those batreries and enough charge in the original to maintain data while
swapping batteries
 
En el artículo <k6a21b$goh$1@reader1.panix.com>, vjp2.at@at.BioStrategis
t.dot.dot.com escribió:

Is there any workaround, even if I don't replace the battery?
Click to expand...
No, because it's not only losing the date and time, it's losing the CMOS
settings, which is why it asks you to run setup each time you boot.

What's so difficult about changing the battery?

--
(\_/)
(='.'=)
(")_(")
 
Mike Tomlinson Inscribed thus:

En el artĂ­culo <k6a21b$goh$1@reader1.panix.com>,
vjp2.at@at.BioStrategis t.dot.dot.com escribiĂł:

Is there any workaround, even if I don't replace the battery?

No, because it's not only losing the date and time, it's losing the
CMOS settings, which is why it asks you to run setup each time you
boot.

What's so difficult about changing the battery?
Click to expand...
Probably because the battery is built into the Dallas clock chip.


--
Best Regards:
Baron.
 
En el artículo <k6hhso$9l6$1@dont-email.me>, Baron
<baron@linuxmaniac.net> escribió:
Mike Tomlinson Inscribed thus:

Probably because the battery is built into the Dallas clock chip.
Click to expand...
Which is not difficult to change either.

--
(\_/)
(='.'=)
(")_(")
 
On 27/10/2012 22:18, Mike Tomlinson wrote:
En el artículo <k6hhso$9l6$1@dont-email.me>, Baron
baron@linuxmaniac.net> escribió:
Mike Tomlinson Inscribed thus:

Probably because the battery is built into the Dallas clock chip.

Which is not difficult to change either.
Click to expand...
Recesses of me mind dug up an old memory of some motherboards having
external connections to wire a battery, where the orginal inbuilt one
had died.

Ah, here goes....

http://www.badcaps.net/forum/showthread.php?t=4318

--
Adrian C
 
Baron <baron@linuxmaniac.net> wrote in news:k6hhso$9l6$1@dont-email.me:

Mike Tomlinson Inscribed thus:

En el artĂ­culo <k6a21b$goh$1@reader1.panix.com>,
vjp2.at@at.BioStrategis t.dot.dot.com escribiĂł:

Is there any workaround, even if I don't replace the battery?

No, because it's not only losing the date and time, it's losing the
CMOS settings, which is why it asks you to run setup each time you
boot.

What's so difficult about changing the battery?

Probably because the battery is built into the Dallas clock chip.

No more than moderately annoying to do if the chip is socketed and you
Click to expand...
have a Dremel.
<http://www.mcamafia.de/mcapage0/dsrework.htm>



--
Ian Malcolm. London, ENGLAND. (NEWSGROUP REPLY PREFERRED)
ianm[at]the[dash]malcolms[dot]freeserve[dot]co[dot]uk
[at]=@, [dash]=- & [dot]=. *Warning* HTML & >32K emails --> NUL
 
I no longer worry about such things. I just never reboot. Maybe I'n lucky because my systemns are nice and stable, I let them run for months. Lessee, in the last almost year, this one has been rebooted about five times. The basement PC more like three times, and one of those was to install the wireless.

Really if you just turn the monitor off you should be fine, and in fact IIRC I DID take the battery out of this one. The only time it nags me is when the power goes out. That happened once when vacuuming the floor.

I see no reason to rebooot a desktop. A laptop is different because of cooling issues and of course if you run off the battery.

I forget why I took the battery out, I think it was because I suspected a BIOS virus.

Anyway, you might have an 800 or 1,000 watt PS in it, but it doesn't pull that much power.

J
 
Much obliged.

Well, there's another PC and some disk drawers over the computer, so..

I WILL open it, but is there any chance I can find the Gateway2000 P5-75
schematics and battery specs online before I do so I can put it all back the same day?



- = -
Vasos Panagiotopoulos, Columbia'81+, Reagan, Mozart, Pindus, BioStrategist
http://www.panix.com/~vjp2/vasos.htm
---{Nothing herein constitutes advice. Everything fully disclaimed.}---
[Homeland Security means private firearms not lazy obstructive guards]
[Urb sprawl confounds terror] [Phooey on GUI: Windows for subprime Bimbos]
 
whit3rd wrote:
On Tuesday, November 13, 2012 2:35:37 PM UTC-8, vjp...@at.BioStrategist.dot.dot.com wrote:
[dead CMOS battery]
I WILL open it, but is there any chance I can find the Gateway2000 P5-75
schematics and battery specs online before I do so I can put it all back the same day?

Gateway, P5-75, and probably Gateway 2000, are all ambiguous; you cannot
really tell what the motherboard uses without an exact model number
of the (probably Intel) motherboard.

What you CAN do, is get to Radio Shack and buy a coin cell (CR2032) and
an alkaline 4.5v (#840) and maybe a 1/2AA (#5150) lithium cell, and
after you see the innards and plop in the battery you need, take
the others back to the store for a refund. For ten-year-old hardware,
those three possibilities cover almost every desktop computer.

Two caveats: if the old battery is leaking corrosive goo, you will have
to clean that up. And, the replacement sometimes does NOT LOOK LIKE the
original battery (look for a labeled socket that fits a pigtail on the alkaline
battery, and use the handy velcro on the battery to attach it ... somwhere).
Click to expand...

We were junking those machines as too old to use at the factory, last
millennium. I may have a motherboard for one, in a crate full of win
3.1 & 95 computers that got pushed under a workbench. 'Gateway 2000'
was their pre millennium brand name, and on every computer they sold.

I think they used the Dallas RTC module with an internal battery. A
black, 28 pin module that was usually soldered to the motherboard.
 
On Tuesday, November 13, 2012 2:35:37 PM UTC-8, vjp...@at.BioStrategist.dot.dot.com wrote:
[dead CMOS battery]
I WILL open it, but is there any chance I can find the Gateway2000 P5-75
schematics and battery specs online before I do so I can put it all back the same day?
Click to expand...
Gateway, P5-75, and probably Gateway 2000, are all ambiguous; you cannot
really tell what the motherboard uses without an exact model number
of the (probably Intel) motherboard.

What you CAN do, is get to Radio Shack and buy a coin cell (CR2032) and
an alkaline 4.5v (#840) and maybe a 1/2AA (#5150) lithium cell, and
after you see the innards and plop in the battery you need, take
the others back to the store for a refund. For ten-year-old hardware,
those three possibilities cover almost every desktop computer.

Two caveats: if the old battery is leaking corrosive goo, you will have
to clean that up. And, the replacement sometimes does NOT LOOK LIKE the
original battery (look for a labeled socket that fits a pigtail on the alkaline
battery, and use the handy velcro on the battery to attach it ... somwhere).
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top