Orcad9.1 or 10.0 Schematic Capture into ProTel Schematic

[Harry Dellamano]

I have a customer that requires a schematic in Protel and I have Orcad
9.0+10.0. Is there a way of transferring Orcad schematics into Protel
schematics?

TIA
Harry

 

[Roger Gt]

"Harry Dellamano" <harryd@tdsystems.org> wrote in message
newse_Ic.54723$6e7.6784@nwrddc03.gnilink.net...
: I have a customer that requires a schematic in Protel and I have
Orcad
: 9.0+10.0. Is there a way of transferring Orcad schematics into
Protel
: schematics?
:
: TIA
: Harry
:
Yes, You can "import" an Orcad schematic into Protel 99SE
Just create an empty design and import the drawing (sch) files.
You will need to align the result to the grid.

 

[Spehro Pefhany]

On Tue, 13 Jul 2004 23:28:47 GMT, the renowned "Harry Dellamano"
<harryd@tdsystems.org> wrote:

I have a customer that requires a schematic in Protel and I have Orcad
9.0+10.0. Is there a way of transferring Orcad schematics into Protel
schematics?

TIA
Harry

Harry:-

Orcad Capture .dsn files can be opened directly by Protel, with pretty
good results, IM(L)E.

Best regards,
Spehro Pefhany
--
"it's the network..." "The Journey is the reward"
speff@interlog.com Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog Info for designers: http://www.speff.com