R
Rodo
Guest
Hi all,
I need to place an array of 35 LEDs on a PCB. I made the schematic and
annotate it. the LEDs were labeled from top-left to top-right D1, D2, etc
(top to bottom) . I run layout and I found that I can quickly place the LEDs
in a matrix.
The problem is, I need them in the same order as the schematic . This matrix
command doesn't seem to have any logic to it. It seems to randomly place the
LEDs in the matrix. I try to group them, it didn't work. Is there a way to
make this command follow *some* rule ?
Thanks
I need to place an array of 35 LEDs on a PCB. I made the schematic and
annotate it. the LEDs were labeled from top-left to top-right D1, D2, etc
(top to bottom) . I run layout and I found that I can quickly place the LEDs
in a matrix.
The problem is, I need them in the same order as the schematic . This matrix
command doesn't seem to have any logic to it. It seems to randomly place the
LEDs in the matrix. I try to group them, it didn't work. Is there a way to
make this command follow *some* rule ?
Thanks