Orcad Capture 7.0 to Capture 9 conversion

[Roberto_c]

Dear Folks,

I have just moved from Capture 7.0 to Capture 9.0, but I have a big
problem. With v9.0 I can read the old Orcad SDT schematics (*.sch) but
I can´t read the schematics generated with the 7.0 version (*.dsn).

Can someone tell me how can I read the old Capture 7.0 dsn with the
9.0 version ?

Thank you very much in advance

Roberto_c

 

[Jim Thompson]

On 11 Dec 2003 09:12:50 -0800, roberto_c@fullzero.com.ar (Roberto_c)
wrote:

Dear Folks,

I have just moved from Capture 7.0 to Capture 9.0, but I have a big
problem. With v9.0 I can read the old Orcad SDT schematics (*.sch) but
I can´t read the schematics generated with the 7.0 version (*.dsn).

Can someone tell me how can I read the old Capture 7.0 dsn with the
9.0 version ?

Thank you very much in advance

Roberto_c

Don't you have that backwards? I use Capture as little as I can
manage, only when someone sends me data in that format but, IIRC, v9
will read v7, but NOT earlier versions; v7 will read earlier versions.

So to convert an early schematic, load into v7 and save in v7 format.
Open saved v7 version schematic with v9 and save as v9 format.

...Jim Thompson
--
| James E.Thompson, P.E. | mens |
| Analog Innovations, Inc. | et |
| Analog/Mixed-Signal ASIC's and Discrete Systems | manus |
| Phoenix, Arizona Voice480)460-2350 | |
| E-mail Address at Website Fax480)460-2142 | Brass Rat |
| http://www.analog-innovations.com | 1962 |

I love to cook with wine. Sometimes I even put it in the food.

 

[Meindert Sprang]

I have just moved from Capture 7.0 to Capture 9.0, but I have a big
problem. With v9.0 I can read the old Orcad SDT schematics (*.sch) but
I can´t read the schematics generated with the 7.0 version (*.dsn).

Strange. My V9.x (0,1,2) reads 7.0 designs without a flaw.

Meindert