Optrex DMF50073N LCD

[Philip Pemberton]

Hi,
I've just been given an Optrex DMF50073N/F-FW LCD panel. Unfortunately, the
only data I've got is a rather bad copy of the pinout. Does anyone have a
copy of the datasheet? All I really need are the timing specs and a timing
diagram.

Thanks.
--
Phil. | Acorn RiscPC600 Mk3, SA202, 64MB, 6GB,
philpem@despammed.com (valid address)| ViewFinder, 10BaseT Ethernet, 2-slice,
http://www.philpem.dsl.pipex.com/ | 48xCD, ARCINv6c IDE, SCSI
No to DRM, software patents and the EUCD! <http://www.ukcdr.org/>
.... I can't think of anything witty to say right now.

 

[Bennet Williams]

If it's a character display, it's probably controlled by an HD44780
chipset. Google HD44780 and you will find the necessary timing.

BRW

On Sun, 25 Apr 2004 12:36:51 +0100, Philip Pemberton
<philpem@despammed.com> wrote:

Hi,
I've just been given an Optrex DMF50073N/F-FW LCD panel. Unfortunately, the
only data I've got is a rather bad copy of the pinout. Does anyone have a
copy of the datasheet? All I really need are the timing specs and a timing
diagram.

Thanks.

 

[Philip Pemberton]

In message <ilpn805hpgivkerccf9n3c8h25nm9b2oa1@4ax.com>
Bennet Williams <brwilliams@adelphia.net> wrote:

If it's a character display, it's probably controlled by an HD44780
chipset. Google HD44780 and you will find the necessary timing.
It's a graphics display - low-level control only. It doesn't have a

command-based controller onboard (e.g. SED1550). Instead, it's got a bunch of
row and column driver ICs.

Later.
--
Phil. | Acorn RiscPC600 Mk3, SA202, 64MB, 6GB,
philpem@despammed.com (valid address)| ViewFinder, 10BaseT Ethernet, 2-slice,
http://www.philpem.dsl.pipex.com/ | 48xCD, ARCINv6c IDE, SCSI
No to DRM, software patents and the EUCD! <http://www.ukcdr.org/>
.... Laugh ? I nearly paid the poll-tax