Optical mouse with ST chip

[Wim Ton]

Hi,

Has anyone dismanteld an optical mouse with a ST VV5351 chip (not the usual
Agilent). I have a whole bag of these chips and I am interested at the
connections. The chip has at least 18 bond wires, so trying all combinations
will be too timeconsuming. I offer 10 of these chips for a good diagram.

Thanks in advance, Wim

wimtonATyahooD0Tcom

 

[Jeroen Vriesman]

http://www.chipworks.com/reports/flyers/STMicro/ST_VV5351B_O_Mouse_Sens_SOC-
0212-001.htm?M=0

They have a contact address and would probably have the info you need.

my email: joenix at gmx dot net

On Fri, 3 Oct 2003 18:51:06 +0100, Wim Ton <wimton@blueyonder.co.uk> wrote:

Hi,

Has anyone dismanteld an optical mouse with a ST VV5351 chip (not the
usual
Agilent). I have a whole bag of these chips and I am interested at the
connections. The chip has at least 18 bond wires, so trying all
combinations
will be too timeconsuming. I offer 10 of these chips for a good diagram.

Thanks in advance, Wim

wimtonATyahooD0Tcom

 

[Wim Ton]

"Jeroen Vriesman" <joenix@the-djs.com> wrote in message
newsprwhmrmr3fn6ec4@news.demon.nl...

http://www.chipworks.com/reports/flyers/STMicro/ST_VV5351B_O_Mouse_Sens_SOC-

Thanks for the info! However, I am only interested in which signal is on
which pin, and not in an expensive report about the reverse engineering of
the whole chip

Wim