Open source verilog code for CRC

[meenz]

Hi folks,

I am looking for links where i can obtain any open source verilog code
fro CRC generator.
If anybody could point me to some links it will be deeply appreciated

Thanks
Meenz

 

[learn_verilog]

On Aug 10, 1:01 am, meenz <meenz.tro...@gmail.com> wrote:

Hi folks,

I am looking for links where i can obtain any open source verilog code
fro CRC generator.
If anybody could point me to some links it will be deeply appreciated

Thanks
Meenz

Just try on Xilinx website under Virtex device, it is more pertaining
to CRC register check used in Virtex devices for Fault Tolerance and
Error Detection applications.

http://www.xilinx.com/bvdocs/appnotes/xapp562.pdf
Try the obove link, there is some information about CRC.
-Harsha

 

[Stefan Frank]

Am Thu, 09 Aug 2007 23:01:13 -0700 schrieb meenz:

I am looking for links where i can obtain any open source verilog code
fro CRC generator.

Hello Meenz,

try the link below.

http://www.easics.com/webtools/crctool

I have never used this code before. I found it after some googling.

Best regsrds,
Steff

 

[Kai Harrekilde-Petersen]

Stefan Frank <stefrank@gmx.net> writes:

Am Thu, 09 Aug 2007 23:01:13 -0700 schrieb meenz:
I am looking for links where i can obtain any open source verilog code
fro CRC generator.

Hello Meenz,

try the link below.

http://www.easics.com/webtools/crctool

I have never used this code before. I found it after some googling.

I've used that code at - uh - at least three different companies, and
checked it against independent (i.e. our own) implementations - it
works.


Kai
--
Kai Harrekilde-Petersen <khp(at)harrekilde(dot)dk>