OLED Displays - fully digital or still analoge

[Spehro Pefhany]

On 30 Jan 2007 08:43:03 -0800, the renowned "Gisly@NNL"
<stian@nordicneurolab.com> wrote:

Hi

I Have a qustion to those familiar with 1-2" OLED displays.

I find both displays with analoge RGB interface and some with digital
RGB interface and my question is therefore:

-is the technique/coding used for drawing up the image (colours) on
the display digital or analoge? I would believe digital but are vey
unsure of this since I have some expensive micro displays that have
analoge RGB signals as input which creates a lot of EMC noise on the
signal cable.

Thanks


Stian

The controllers on the ones I have use digital techniques.


Best regards,
Spehro Pefhany
--
"it's the network..." "The Journey is the reward"
speff@interlog.com Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog Info for designers: http://www.speff.com

 

[Gisly@NNL]

Hi

I Have a qustion to those familiar with 1-2" OLED displays.

I find both displays with analoge RGB interface and some with digital
RGB interface and my question is therefore:

-is the technique/coding used for drawing up the image (colours) on
the display digital or analoge? I would believe digital but are vey
unsure of this since I have some expensive micro displays that have
analoge RGB signals as input which creates a lot of EMC noise on the
signal cable.

Thanks


Stian