Ohm Amplifiers , USA ?

N

N_Cook

Guest
Amplifier with no maker's plate other than scriptform logo of Ohm and model
SC60 on front (from 1983) or even where a plate could have been. Used for 20
years on 240V so presumably 240V rated. Uses RCA & TI active and Accutronics
springline so presumably USA made. Word "ohm" makes it impossible to google
for
 
"Nutcase Kook "
Amplifier with no maker's plate other than scriptform logo of Ohm and
model
SC60 on front (from 1983) or even where a plate could have been. Used for
20
years on 240V so presumably 240V rated. Uses RCA & TI active and
Accutronics
springline so presumably USA made. Word "ohm" makes it impossible to
google
for

** Ohm are a long established US speaker maker:

http://www.ohmspeakers.com/

Don't think they ever made guitar amps.

You are one dumb fuckwit.


..... Phil
 
On 10/01/2010 09:45, N_Cook wrote:
Amplifier with no maker's plate other than scriptform logo of Ohm and model
SC60 on front (from 1983) or even where a plate could have been. Used for 20
years on 240V so presumably 240V rated. Uses RCA& TI active and Accutronics
springline so presumably USA made. Word "ohm" makes it impossible to google
for


http://www.ohm.co.uk/

Ron(UK)
 
Ron <ron@lunevalleyaudio.com> wrote in message
news:jJ6dnbr9Z_UfX9TWnZ2dnUVZ8odi4p2d@bt.com...
On 10/01/2010 09:45, N_Cook wrote:
Amplifier with no maker's plate other than scriptform logo of Ohm and
model
SC60 on front (from 1983) or even where a plate could have been. Used
for 20
years on 240V so presumably 240V rated. Uses RCA& TI active and
Accutronics
springline so presumably USA made. Word "ohm" makes it impossible to
google
for


http://www.ohm.co.uk/

Ron(UK)

Ta for that, not come across them before, absolutely nothing inside would
indicate UK manufacture, despite at that sort of era, it would have been pcb
populated/soldered etc in UK I would think
 
Getting in closer, Dubilier and Philips caps, UK made pots and probably
Cliff jack sockets. So lesson is passives rathe rthan actives more likely
indicate nationality.
 

Welcome to EDABoard.com

Sponsor

Back
Top