now what is this? iMPACT:2356 - Platform Cable USB firmware

J

jleslie48

Guest
Firmware hex file version = 1100.
Downloading C:/Xilinx/10.1/ISE/data/xusbdfwu.hex.
Downloaded firmware version 1100.
PLD file version =0012h
PLD fversion = FFFh.
iMPACT:2356 - Platform Cable USB firmware must be updated. This
operation may take up to 10 minutes on a USB 2.0 port or up to 30
minutes on a USB 1.1 port.
 
On Jan 27, 2:24 pm, jleslie48 <j...@jonathanleslie.com> wrote:
Firmware hex file version = 1100.
Downloading C:/Xilinx/10.1/ISE/data/xusbdfwu.hex.
Downloaded firmware version 1100.
PLD file version =0012h
PLD fversion = FFFh.
iMPACT:2356 - Platform Cable USB firmware must be updated. This
operation may take up to 10 minutes on a USB 2.0 port or up to 30
minutes on a USB 1.1 port.
Click to expand...
looks like its hung at 28%, its been stuck now for 10 minutes.
 
On Jan 27, 11:25 am, jleslie48 <j...@jonathanleslie.com> wrote:
On Jan 27, 2:24 pm, jleslie48 <j...@jonathanleslie.com> wrote:

Firmware hex file version = 1100.
Downloading C:/Xilinx/10.1/ISE/data/xusbdfwu.hex.
Downloaded firmware version 1100.
PLD file version =0012h
PLD fversion = FFFh.
iMPACT:2356 - Platform Cable USB firmware must be updated. This
operation may take up to 10 minutes on a USB 2.0 port or up to 30
minutes on a USB 1.1 port.

looks like its hung at 28%, its been stuck now for 10 minutes.
Click to expand...
I didn't really see a question in your post, but...

It's very common that the USB Platform cable gets the firmware updated
when connecting to a new version of ISE. It happens every time for
me.

I've never had a glitch in the update process, it does take a while.
You didn't mention anything about OS or version; I see a dos-like path
in the message so I'm guessing that you're using some bundle of spy-
ware and viruses from Redmond WA. If so, you must be 1000% certain
that your system has the USB drivers configured exactly right, or bad
things can happen.

Try again with a clean install. Report back with real questions, and
real details.

AL
 
On Jan 27, 2:32 pm, LittleAlex <alex.lo...@email.com> wrote:
On Jan 27, 11:25 am, jleslie48 <j...@jonathanleslie.com> wrote:

On Jan 27, 2:24 pm, jleslie48 <j...@jonathanleslie.com> wrote:

Firmware hex file version = 1100.
Downloading C:/Xilinx/10.1/ISE/data/xusbdfwu.hex.
Downloaded firmware version 1100.
PLD file version =0012h
PLD fversion = FFFh.
iMPACT:2356 - Platform Cable USB firmware must be updated. This
operation may take up to 10 minutes on a USB 2.0 port or up to 30
minutes on a USB 1.1 port.

looks like its hung at 28%, its been stuck now for 10 minutes.

I didn't really see a question in your post, but...

It's very common that the USB Platform cable gets the firmware updated
when connecting to a new version of ISE. It happens every time for
me.

I've never had a glitch in the update process, it does take a while.
You didn't mention anything about OS or version; I see a dos-like path
in the message so I'm guessing that you're using some bundle of spy-
ware and viruses from Redmond WA. If so, you must be 1000% certain
that your system has the USB drivers configured exactly right, or bad
things can happen.

Try again with a clean install. Report back with real questions, and
real details.

AL
Click to expand...
sorry, I'm on windoze xp pro and version10.1 ISE. nothing new was
installed,
all I know is that for the first time that phone home thing didn't
fail, when I rebuilt my
project. I then went to Impact 10.1 and now I got that message. and
on a system
restart, both the board and PC, I'm now hung at 6%.

what is going on? I don't want my firmware updated unless I approve
it, certainly not
a half hour procedure in the middle of my day...
 
On Jan 27, 2:40 pm, jleslie48 <j...@jonathanleslie.com> wrote:
On Jan 27, 2:32 pm, LittleAlex <alex.lo...@email.com> wrote:



On Jan 27, 11:25 am, jleslie48 <j...@jonathanleslie.com> wrote:

On Jan 27, 2:24 pm, jleslie48 <j...@jonathanleslie.com> wrote:

Firmware hex file version = 1100.
Downloading C:/Xilinx/10.1/ISE/data/xusbdfwu.hex.
Downloaded firmware version 1100.
PLD file version =0012h
PLD fversion = FFFh.
iMPACT:2356 - Platform Cable USB firmware must be updated. This
operation may take up to 10 minutes on a USB 2.0 port or up to 30
minutes on a USB 1.1 port.

looks like its hung at 28%, its been stuck now for 10 minutes.

I didn't really see a question in your post, but...

It's very common that the USB Platform cable gets the firmware updated
when connecting to a new version of ISE. It happens every time for
me.

I've never had a glitch in the update process, it does take a while.
You didn't mention anything about OS or version; I see a dos-like path
in the message so I'm guessing that you're using some bundle of spy-
ware and viruses from Redmond WA. If so, you must be 1000% certain
that your system has the USB drivers configured exactly right, or bad
things can happen.

Try again with a clean install. Report back with real questions, and
real details.

AL

sorry, I'm on windoze xp pro and version10.1 ISE. nothing new was
installed,
all I know is that for the first time that phone home thing didn't
fail, when I rebuilt my
project. I then went to Impact 10.1 and now I got that message. and
on a system
restart, both the board and PC, I'm now hung at 6%.

what is going on? I don't want my firmware updated unless I approve
it, certainly not
a half hour procedure in the middle of my day...
Click to expand...
well it finally finished. it took over 50 minutes.
all is working now.
 
its been about 40 min and it is not even 1 % how did you solve your problem??

--http://compgroups.net/comp.arch.fpga/now-what-is-this-impact-2356-platform-cable-us/266024
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top